EMERSON IC693MDL741
IC693MDL741 Discrete Output Module features 16 channels of 12/24 VDC Negative Logic output, divided into two groups of eight for efficient load distribution. GE Fanuc (EMERSON) Series 90-30 PLC delivers 0.5 amperes per point and 2 amperes per common, find detailed technical specifications and wiring and installation guidelines for this module.
US$ 1,416.67
EMERSON IC693CBL312
IC693CBL312 I/O Base Expansion Cable is a 0.5-foot cable featuring 25-pin male and female D-Sub connectors for reliable connectivity between the CPU and expansion baseplates. GE Fanuc (EMERSON) Series 90-30 PLC cable ensures stable data transmission and minimal signal loss in modular configurations, review technical specifications and installation guidelines before use.
US$ 450.00
EMERSON IC693MDL754
IC693MDL754 Output Module provides 32 Positive Logic DC output points in two 16-channel groups and features integrated ESCP for short circuit protection. GE Fanuc (EMERSON) Series 90-30 PLC supports 0.5 Amperes per point and draws 125 mA from the 5 VDC backplane, search for detailed technical specifications and wiring and installation guides.
US$ 500.00
EMERSON IC693PBS201
IC693PBS201 Profibus DP Slave Interface Module supports up to 12 Mbaud transmission and 244 bytes of I/O data per cycle via two 9-pin D-shell connectors. GE Fanuc (EMERSON) Series 90-30 PLC communication module ensures reliable data exchange, drawing 700 mA from the 5 VDC backplane, locate technical specifications and wiring and installation documentation for system setup.
US$ 5,800.00
EMERSON IC693DSM324
IC693DSM324 Motion Controller Module supports four axes for complex motion profiles including interpolation and uses an intelligent processor for real-time response. GE Fanuc (EMERSON) Series 90-30 PLC ensures synchronization, draws 1.2 A from the 5 VDC backplane, and supports Quadrature Encoder feedback, locate technical specifications and wiring and installation guides.
US$ 5,816.67
EMERSON IC693MDR390
IC693MDR390 Combination I/O Module integrates 8 DC inputs (–30 to +32 VDC, 7.5 mA) and 8 N.O. relay outputs (2 A max, 24 VDC/240 VAC) with a 15 ms input response time. GE Fanuc (EMERSON) Series 90-30 PLC consumes 80 mA of internal power, locate the detailed wiring and installation guide and technical specifications for versatile control applications.
US$ 1,175.00
EMERSON IC693CHS393
IC693CHS393 Remote Baseplate provides 10 I/O slots and 1 power supply slot, supports standard/specialty modules, and uses a DIP switch for rack address configuration. GE Fanuc (EMERSON) Series 90-30 PLC baseplate requires a Bus Transmitter Module (BTM) for remote operation, review technical specifications and wiring and installation documentation for secure panel mounting.
US$ 3,750.00
EMERSON IC693MDL230
IC693MDL230 Isolated Input Module provides 8 AC input channels operating at 120 VAC within a 95 to 132 VAC range, ensuring reliable signal monitoring through channel isolation. GE Fanuc (EMERSON) Series 90-30 PLC features an ON/OFF response time of 15 to 30 ms and draws 150 mA from the 5 VDC backplane, locate wiring and installation guides and technical specifications for noise-resistant implementation.
US$ 766.67
EMERSON IC693DSM314
GE Fanuc (EMERSON) IC693DSM314 4-axis motion control module manages servo and stepper systems with less than 5 ms motion block processing. This reliable PLC module stores 10 programs and 40 subroutines in non-volatile memory to review technical specifications and wiring and installation tips.
US$ 3,658.33
EMERSON IC693BEM330
GE Fanuc (EMERSON) IC693BEM330 FIP Bus Interface Module provides 1 MHz data exchange using two 9-pin D-shell connectors for distributed control. The Series 90-30 PAC module has four LED indicators and interfaces with 90-70 controllers to examine technical specifications and troubleshooting and compatibility tips.
US$ 3,108.33
EMERSON IC693BEM340
GE Fanuc (EMERSON) IC693BEM340 FIP Bus Controller Module performs 2.5 Mbit/s data exchange between I/O devices and the central PLC. This Series 90-30 module is rack-mounted and shares the power supply for synchronized operation to find wiring and installation and replacement and upgrades information.
US$ 4,150.00
EMERSON IC693MDL660
GE Fanuc (EMERSON) IC693MDL660 discrete input module offers 32 channels for 24 VDC signal monitoring in positive or negative logic. This Series 90-30 module features four 8-channel groups with 7.5 mA rated input current to check technical specifications and wiring and installation guidelines.
US$ 2,350.00
EMERSON IC693CBL305
GE Fanuc (EMERSON) IC693CBL305 is a 1 foot Wye cable for Series 90-30 axis communications coprocessor modules. It utilizes 25-pin RS-232/RS-485 connectors for reliable short-distance data transmission to examine technical specifications and troubleshooting and compatibility charts.
US$ 716.67
EMERSON IC693MDL730
GE Fanuc (EMERSON) IC693MDL730 positive logic discrete output module offers eight channels with 12–24 VDC and 2 A per point output current. The module provides reliable switching with 2 A at 60 C fuse protection to examine technical specifications and wiring and installation tips.
US$ 1,500.00
EMERSON IC693ALG390
GE Fanuc (EMERSON) IC693ALG390 analog module offers two voltage output channels ranging from –10 to +10 VDC for precise control. This Series 90-30 unit has 2.5 mV resolution and 5 ms update rate to check technical specifications and wiring and installation procedures.
US$ 2,158.33
EMERSON IC693CHS398
GE Fanuc (EMERSON) IC693CHS398 is a 10-slot expansion baseplate providing high-density I/O capacity for Series 90-30 PLC systems. It features one power supply slot and one expansion port, offering robust architecture details on technical specifications and replacement and upgrades planning.
US$ 966.67
EMERSON IC693CBL301
GE Fanuc (EMERSON) IC693CBL301 is a 6 feet I/O bus expansion cable with continuous shielding for signal integrity in industrial settings. The cable uses 25-pin male and female connectors for flexible baseplate connection to find technical specifications and wiring and installation guide.
US$ 600.00
EMERSON IC693APU302
GE Fanuc (EMERSON) IC693APU302 Axis Positioning Module features two independent axes for precise servo motor positioning and synchronized motion. Compatible with CPUs including IC693CPU323, the module has a 9-pin axis port to examine technical specifications and troubleshooting and compatibility guides.
US$ 8,083.33
EMERSON IC693BEM341
GE Fanuc (EMERSON) IC693BEM341 FIP Bus Controller Module supports 2.5 MHz data rates through dual 9-pin D-shell connectors for reliable networking. This PAC module has an RS-485 port, interfaces with Series 90-70 controllers, and offers technical specifications and troubleshooting and compatibility data.
US$ 3,625.00
EMERSON IC693CMM302
GE Fanuc (EMERSON) IC693CMM302 Genius communication module connects up to 31 nodes on the Genius I/O network at 153.6 kbaud. This PAC module ensures synchronized data sharing with 128 bytes TX and RX capacity to find technical specifications and wiring and installation guides.
US$ 2,450.00
EMERSON IC693MDL742
GE Fanuc (EMERSON) IC693MDL742 discrete output module features 16 channels for 12–24 VDC positive logic and embedded ESCP for protection. The module supports 1.0 A per channel and 4 A at 50 C group capacity to find technical specifications and wiring and installation tips.
US$ 2,250.00
EMERSON IC693CPU360
GE Fanuc (EMERSON) IC693CPU360 processor module provides 25 MHz speed and a 0.22 ms/1K scan rate for fast logic execution. The single-slot CPU uses the power supply's RS-485 port, has 240 KB user memory, and offers technical specifications and replacement and upgrades planning.
US$ 6,400.00
EMERSON IC693MDL646
GE Fanuc (EMERSON) IC693MDL646 is a discrete input module with 16 channels supporting 24 VDC in both positive and negative logic. The module operates within a 0–30 VDC range at 7 mA input current to review technical specifications and wiring and installation guidelines.
US$ 1,183.33
EMERSON IC693CPU341
GE Fanuc (EMERSON) IC693CPU341 CPU module operates at 20 MHz with a 0.3 ms/1K Boolean logic scan rate for mid-range control. The unit supports 80 Kbytes memory, up to 512 discrete I/O, and uses an SNP/SNP-X port to check technical specifications and replacement and upgrades planning.
US$ 3,108.33
EMERSON IC693ACC336
GE Fanuc (EMERSON) IC693ACC336 auxiliary terminal board is a 36-pin interface for DSM302 and DSM314 motion control modules for precise servo interfacing. It features screw terminals for 14–18 AWG wire and 30 VDC/5 VDC rated inputs to find technical specifications and wiring and installation information.
US$ 1,533.33
EMERSON IC693CPU313
GE Fanuc (EMERSON) IC693CPU313 5-slot embedded CPU baseplate uses a 10 MHz 80188 processor with a 0.6 ms/1K Boolean logic scan rate. This unit supports 12 Kbytes memory and includes an SNP/SNP-X serial port to check technical specifications and replacement and upgrades options.
US$ 2,141.67
EMERSON IC693PBM200
GE Fanuc (EMERSON) IC693PBM200 Profibus DP Master module coordinates data exchange for up to 125 slave units with 244 bytes I/O per slave. The module features RS-232 and RS-485 ports for diagnostics and network interfacing to review technical specifications and troubleshooting and compatibility guides.
US$ 4,616.67
EMERSON IC693CPU352
GE Fanuc (EMERSON) IC693CPU352 is a modular CPU with a 25 MHz 80386EX processor and 0.3 ms/1K Boolean scan rate. It features 240 Kbytes memory, three serial ports, supports 32,640 analog I/O, and offers technical specifications and replacement and upgrades planning details.
US$ 6,425.00
EMERSON IC693CBL316
GE Fanuc (EMERSON) IC693CBL316 is a 3-foot serial cable for secure data transmission between Series 90-30 CPUs and digital servo modules. The cable includes a 9-pin D-shell connector and a 6-pin RJ-11 connector to find technical specifications and wiring and installation data.
US$ 458.33
EMERSON IC693ALG442
GE Fanuc (EMERSON) IC693ALG442 analog combination module has four inputs and two outputs compatible with voltage and current signals. The versatile unit supports 0-20 mA, 4-20 mA, and +/-10 V bipolar/unipolar ranges to review technical specifications and wiring and installation data.
US$ 3,466.67
EMERSON IC693CHS392
GE Fanuc (EMERSON) IC693CHS392 is a 10-slot expansion baseplate with one power supply slot and an expansion port for scalable systems. It supports 50-foot interconnecting cables and DIP switch configuration to review technical specifications and wiring and installation details.
US$ 1,441.67
EMERSON IC693APU301
GE Fanuc (EMERSON) IC693APU301 Axis Positioning Module uses a single motion axis for precise servo motor control and position management. Compatible with IC693CPU323, the module supports follower mode and uses a 9-pin axis port to review technical specifications and troubleshooting and compatibility data.
US$ 4,683.33