OVERVIEW

Official designation: Emerson IC200PNS002 (VersaMax, PROFINET Scanner Module)

Role/Application: PROFINET IO-Device module that connects a remote VersaMax I/O node to an IO-Controller via dual 100 Mbps Multi-Mode Fiber (MMF) ports, handling real-time data exchange.

KEY SPECS SUMMARY

Power: 1.10 A at 5 VDC

Interfaces / Ports: Two 100 Mbps SC-Duplex ports

Indicators: PWR1, PWR2, OK, FAULT, CONNECT, LAN, PORT 1, PORT 2

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: VersaMax I/O system, Proficy ME 7.0+

Limit: Supports 8 I/O modules, 2880 bytes total I/O data

Lifecycle: Active

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the range of configurable I/O data update rates supported on the PROFINET LAN?

A: The module supports configurable I/O data updates from 1 ms up to 512 ms.

Wiring & Installation:

Q: Which connector is used for the dual MMF ports and what is the function of the USB port?

A: The dual MMF ports use SC-Duplex connectors; the Micro-B USB port is for firmware upgrades only.

Troubleshooting & Compatibility:

Q: What do the OK and FAULT LEDs indicate, and how does the module handle network loss?

A: OK is solid green for normal operation; FAULT glows amber for PROFINET diagnosis; I/O states are maintained during network loss.

Replacement & Upgrades:

Q: What is the required CPU firmware version and the minimum software version for configuring the module?

A: RX3i PLC CPU requires firmware version 7.0 or later, and configuration needs Proficy Machine Edition version 7.0 or later.