OVERVIEW

Official designation: GE Fanuc IC200ALG230 (VersaMax, Analog Input Module)

Role/Application: This module provides four single-ended analog input channels for the VersaMax platform, configurable for standard industrial current (4-20 mA) or voltage signals.

KEY SPECS SUMMARY

Power: 5 VDC, 125 mA maximum from backplane

Interfaces / Ports: Requires IC200CHSxxx carrier or terminal block

Indicators: Two LEDs (OK, INT PWR)

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: VersaMax I/O System

Limit: Isolation 1500 VAC for 1 minute

Lifecycle: Active

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What are the primary input signal types and voltage ranges supported by the module?

A: It supports 4-20 mA current and bipolar minus 10 VDC to plus 10 VDC or unipolar 0 to 10 VDC voltage.

Wiring & Installation:

Q: How is the IC200ALG230 configured for current versus voltage input mode?

A: Two jumpers on the required I/O carrier terminals are used to select voltage or current mode and unipolar or bipolar operation.

Troubleshooting & Compatibility:

Q: What do the OK and INT PWR indicator LEDs represent on the front face of the module?

A: The OK LED indicates backplane power is present, and INT PWR indicates internal field power is present.

Replacement & Upgrades:

Q: Is external power required for the IC200ALG230 analog input module itself?

A: No, the module receives operating power from the VersaMax backplane, but user transceivers may need external power.