OVERVIEW

Official designation: GE Fanuc IC200CBL001 (VersaMax, Serial Programming Cable)

Role/Application: A communications cable designed for programming and configuration of GE Fanuc VersaMax PLC CPUs via their serial RS-232 port, typically used for firmware updates and diagnostics.

KEY SPECS SUMMARY

Power: Not applicable, passive cable

Interfaces / Ports: 9-pin male to 9-pin female D-sub

Indicators: Not applicable, passive cable

Operating Temp: Refer to the latest manufacturer manual.

Platform / Compatibility: VersaMax and PacSystem PLCs

Limit: Maximum length 15 meters (50 feet)

Lifecycle: Active

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the primary communication protocol supported by this RS-232 cable for VersaMax CPUs?

A: The IC200CBL001 cable facilitates the use of the SNP (Serial Network Protocol) for programming.

Wiring & Installation:

Q: How should the cable be correctly connected to the CPU for programming operations?

A: The cable connects the PC's 9-pin serial port to the CPU's Port 1, typically functioning as a straight-through extension cable.

Troubleshooting & Compatibility:

Q: Why is shield connection important when using this serial cable in a point-to-point configuration?

A: The cable shield must connect to the shell on both connector ends for proper signal integrity and functionality.

Replacement & Upgrades:

Q: What is a common modern alternative for the IC200CBL001 when a computer lacks a DB9 port?

A: A common alternative is a USB version, often designated USB-IC200CBL001 or using a USB-to-serial adapter.