OVERVIEW

Official designation: GE Fanuc IC200ALG264 (VersaMax, Analog Current Input Module)

Role/Application: A high-resolution module providing 15 single-ended channels to accurately measure 0 to 20 mA or 4 to 20 mA analog current signals for industrial process control within the VersaMax I/O system.

KEY SPECS SUMMARY

Power: 100 mA from plus 5V bus

Interfaces / Ports: VersaMax carrier terminal blocks

Indicators: OK LED, INT PWR LED

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: VersaMax I/O system, single-ended

Limit: Input Impedance 200 Ohms max

Lifecycle: Active

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the high-resolution digital count per microampere (uA) for the 4-20 mA range?

A: The digital resolution in the 4-20 mA range is 1 count per 0.5 micro Ampere of input current.

Wiring & Installation:

Q: How is the 0-20 mA versus 4-20 mA input current range configured on the module?

A: Range selection is set by a jumper located on the module's associated carrier terminal blocks.

Troubleshooting & Compatibility:

Q: What diagnostic capability is specifically available only when the module is configured for 4-20 mA operation?

A: The module reports an Open Wire fault detection for each channel when operating in the 4-20 mA range.

Replacement & Upgrades:

Q: What is the continuous isolation rating between the user input field-side circuits and the module's logic?

A: The isolation rating between the user input and the module's logic is 250 Volts AC continuous.