OVERVIEW

Official designation: GE Fanuc IC693MDL760 (Series 90-30, Solenoid Valve Output Module)

Role/Application: This component provides combined digital and pneumatic control by offering five 24VDC sourcing outputs and eleven 3-way solenoid valve outputs for the Series 90-30 PLC platform.

KEY SPECS SUMMARY

Power: 75 mA from 5V backplane bus

Interfaces / Ports: One 10-pin field wiring connector, one 12-pin Solenoid Forcing Pendent connector

Indicators: Yes (Refer to the latest manufacturer manual.)

Operating Temp: 0 to 45 degrees C

Platform / Compatibility: GE Fanuc Series 90-30 PLC

Limit: 0.5 A per DC point, 2.0 A total for 5 DC points

Lifecycle: Discontinued by manufacturer

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the maximum supply pressure for the pneumatic outputs?

A: The maximum peak supply pressure for the 11 pneumatic outputs is 100 PSI.

Wiring & Installation:

Q: What external power supply is required for the solenoid valves?

A: Solenoid power requires an external 24 VDC source connected to the DC Outputs connector.

Troubleshooting & Compatibility:

Q: Does the module require special configuration with programming software?

A: For VersaPro 2.0 or later, configure by catalog number; otherwise, use a standard 16-point generic output configuration.

Replacement & Upgrades:

Q: Is this IC693MDL760 module still actively produced by the manufacturer?

A: No, the IC693MDL760 is listed as discontinued by the manufacturer.