OVERVIEW

Official designation: GE Fanuc IC200ERM002 (VersaMax, Expansion Receiver Module)

Role/Application: A non-isolated expansion receiver module that extends a VersaMax system by interfacing the main rack to an expansion rack, supporting additional I/O and specialty modules.

KEY SPECS SUMMARY

Power: 70 mA maximum at 5 VDC backplane

Interfaces / Ports: Two 26-pin female D-shell ports

Indicators: PWR, EXP RX, SCAN LEDs

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: VersaMax I/O system, non-isolated expansion

Limit: Seven racks maximum, eight modules per expansion rack

Lifecycle: Active

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What are the two possible data transfer rates, and how do they relate to the system configuration?

A: Data rates are 5 Mbps or 2.765 Mbps, depending on the multi-rack or single-ended configuration used.

Wiring & Installation:

Q: What is the maximum cable length when using the module in a multi-rack system configuration?

A: The total cable length for a multi-rack implementation must not exceed 50 feet or 15 meters.

Troubleshooting & Compatibility:

Q: What is the significance of the EXP RX and SCAN LED indicators on the module faceplate?

A: EXP RX indicates the status of the expansion bus communication; SCAN indicates active expansion scan.

Replacement & Upgrades:

Q: Which other module must be used in the main rack to connect to the IC200ERM002 expansion rack?

A: The main rack requires an Expansion Transmitter Module (IC200ETM001 or equivalent) to interface with the IC200ERM002.