GE Fanuc (EMERSON) IC694TBB032 Box-Style Terminal Block for PACSystems RX3i modules offers secure 32 points connectivity, accepting #14 to #26 AWG conductors with a required 7 lb-in tightening torque and 0.3 inch strip length for reliable signal transmission. Confirm technical specifications for optimal performance and utilize our official wiring and installation guides to ensure proper termination in demanding industrial control systems.

GE Fanuc (EMERSON) IC694ALG392 Analog Output Module provides eight single-ended channels for voltage or current, offering 16-bit resolution, a Non-isolated design, and requiring 225 mA at 5 VDC from the RX3i backplane, connecting via a 25-pin D-Sub connector. Always check the full technical specifications and consult the manufacturer’s documentation to verify troubleshooting and compatibility prior to installation in complex automation environments.

GE Fanuc (EMERSON) IC694MDL645 Discrete Input Module supplies 16 channels of 24 VDC digital input in one group, featuring a fast 8 ms input delay and drawing 7 mA per channel, with field connections made via a 20-pin connector. Reference the official technical specifications to confirm power budget requirements and consult detailed wiring and installation guides for proper positive or negative logic configuration.

GE Fanuc (EMERSON) IC695CHS016 Universal Backplane offers 12 slots and a dual-bus architecture, supporting mixed RX3i and Series 90-30 modules with isolated 24 VDC input and low draw requirements of 600 mA at 3.3 VDC across its 565 mm length. Evaluate suitable replacement and upgrades paths for your system and consult reliability documentation for troubleshooting and compatibility guidelines across various operating environments.

GE Fanuc (EMERSON) IC694CHS392 Serial Expansion Baseplate provides 10 slots for RX3i I/O modules, communicating over the Serial Expansion Bus and supporting up to 15 meters of cable length with a low 240 mA draw at 5 VDC. Consult system replacement and upgrades documentation for proper integration planning and utilize the official wiring and installation guides to manage the distributed control architecture effectively.

GE Fanuc (EMERSON) IC695PNC001 PROFINET Controller Module connects RX3i CPUs (F/W 7.0+) to Class A networks, supporting high-speed 10/100 Mbps data exchange via 2 RJ-45 ports and 2 SFP slots, requiring 700 mA at 5 VDC from the backplane. Before deployment, confirm technical specifications for network topology optimization and refer to troubleshooting and compatibility guidelines to ensure seamless integration with field devices and other I/O controllers.

GE Fanuc (EMERSON) IC695ACC402 Energy Pack Module supplies critical backup power for RX3i CPUs like the CPE330, featuring a 5 years service life, 3.6 VDC Lithium-Ion technology, and safe operation within 0 C to 60 C environments. Review the full technical specifications including the max 48 hours charging requirement and consult the replacement and upgrades guide to ensure continuous system stability.

GE Fanuc (EMERSON) IC695CPE330 Controller features a 1 GHz CPU with 64 MB RAM and 64 MB non-volatile memory, supporting Hot-Standby Redundancy, 10/100/1000 Mbps Ethernet ports, and requiring 1.2 A at 3.3 VDC from the backplane. Consult the official technical specifications to assess the Ladder Diagram programming environment and reference troubleshooting and compatibility guides before connecting PROFINET, EGD, or Genius I/O networks.

GE Fanuc (EMERSON) IC695PSD140 DC Power Supply operates from 18–30 VDC input, delivering 40 watts total power with 0–6 A at 5.1 VDC and an 85 percent typical efficiency, supporting system Redundancy across 0 C to 60 C operating temperatures. Utilize the technical specifications for accurate power budget planning and consult the manual for troubleshooting and compatibility guidelines related to load-sharing configurations.

GE Fanuc (EMERSON) IC695CPE310 Controller Module provides 1.1 GHz processing with 64 MB RAM, managing 32K Discrete I/O, supporting 8 local racks, and featuring 10/100 Mbps Ethernet alongside dual RS-232/RS-485 serial ports while drawing 0.8 A at 5 VDC. Review the full technical specifications for I/O memory allocation and utilize wiring and installation guides to correctly configure Modbus Master and SNP communication protocols.

GE Fanuc (EMERSON) IC694MDL940 Discrete Output Module provides 16 NO isolated contact outputs, supporting 5–250 VAC/DC switching at 2 amps per output and 4 amps per common, with a minimum electrical lifespan of 500,000 operations. Review the complete technical specifications for bus current draw details and consult the official wiring and installation guides for proper configuration of the four output groups and external fusing requirements.

GE Fanuc (EMERSON) IC695PSD040 DC Power Supply provides 40 watts of total power from 12–30 VDC input, delivering a maximum of 6 A at 5.1 VDC and 9 A at 3.3 VDC output, featuring Isolated power circuits and robust Overload Protection. Always examine the full technical specifications to confirm power consumption requirements and review the manual for troubleshooting and compatibility details before mounting to the universal backplane.

GE Fanuc (EMERSON) IC695PSA040 AC/DC Power Supply accepts 85–264 VAC or 100–300 VDC input to deliver 40 watts of total output power, including 6 A at 5.1 VDC, operating safely across 0 C to 60 C with an Internal Fuse. Refer to the technical specifications for input frequency and current ratings, and utilize troubleshooting and compatibility guides to ensure reliable power distribution across your RX3i system components.

GE Fanuc (EMERSON) IC695NIU001 Network Interface Unit acts as a bridge for RX3i and Series 90-30 I/O, featuring Dual RS-232/485 ports for SNP/Modbus RTU protocols, 10 MB Flash memory, and requiring the IC695ETM001 for EGD communication and networking. Review the technical specifications to confirm the 550 mA @ 5 VDC backplane current draw and utilize firmware upgrades to ensure long-term system compatibility and scalability.

GE Fanuc (EMERSON) IC695ACC400 Energy Pack Module (Lithium-Ion) provides 1.5 to 3 seconds of backup power for RX3i CPUs like the CPE310 during power loss, featuring a typical lifespan exceeding 10 years and safe operation between 0 C and 60 C. Consult system replacement and upgrades documentation for end-of-life planning and review technical specifications to ensure seamless integration with your PACSystems RX3i controller module.

GE Fanuc (EMERSON) IC695ETM001 Ethernet Module provides high-speed communication and networking for RX3i, featuring 2 Isolated RJ45 ports for 10/100 Mbps Ethernet/IP and EGD protocols, requiring 350 mA at 5 VDC from the backplane. Check the technical specifications for details on the 9-pin Sub-D Station Manager connector functionality and proper configuration procedures for resilient industrial network deployment.

GE Fanuc (EMERSON) IC694ACC310 Slot Filler Module is a Single Slot, Non-electronic unit drawing 0 mA, designed to protect unused RX3i backplane slots from dust, debris, and EMI/RFI interference. Consult the technical specifications for enclosure material details and review replacement and upgrades options to ensure continuous mechanical stability and environmental protection for the control system.

GE Fanuc (EMERSON) IC695ACC302 Auxiliary Smart Battery Module delivers 3 VDC output, 15 Ah capacity, and up to 200 days RAM memory backup for PACSystems RX3i/RX7i controllers. This smart lithium module features a flame-retardant ABS plastic casing and a 7 years nominal shelf life, ensuring reliable industrial automation performance; learn key technical specifications and replacement and upgrades for your system needs.

GE Fanuc (EMERSON) IC695CHS007 universal backplane provides a reliable foundation for PACSystems RX3i, supporting IC695/4/3 modules across 7 slots. This passive backplane features a dual bus architecture, isolated 24 VDC terminal strip, and 0 to 60 C operating range; review wiring and installation tips and technical specifications for optimal configuration.

GE Fanuc (EMERSON) IC695CPE305 is a high-speed CPU module for PACSystems RX3i, featuring a 1.1 GHz processor and 5 MB RAM with non-volatile memory. This controller achieves a fast 0.72 ms scan rate and provides dual serial (RS-232/485) and Ethernet/USB ports; discover current troubleshooting and compatibility guidelines and replacement and upgrades options.

GE Fanuc (EMERSON) IC695CHS012 is a 12-slot universal backplane for PACSystems RX3i, supporting PCI/serial bus architectures and module hot-swapping. This dual bus backplane is rated at 600 mA at 3.3 VDC and 240 mA at 5 VDC, ensuring a 0 to 60 C operating range; review detailed wiring and installation procedures and technical specifications for system deployment.

GE Fanuc (EMERSON) IC630CCM300 Versamax Data Communication Module ensures effective network communications with a 0 C to 60 C operating range and a required 5V DC power input. This robust DCM, featuring an interface of switches, LEDs, and ports, is designed for efficient DIN Rail mount deployment, check technical specifications and explore replacement and upgrades guidance before purchasing the unit.