상품 정보
상품 상세설명
OVERVIEW
Official designation: GE Fanuc IC695EDS001 (PACSystems RX3i, Ethernet DNP3 Outstation Module)
Role/Application: DNP3 Outstation module connecting the RX3i controller to a DNP3 network using TCP/IP. Supports up to 8 Masters and 12,072 points for critical power applications.
KEY SPECS SUMMARY
Power: 840 mA at 3.3 VDC
Interfaces / Ports: Two RJ-45, One RS-232
Indicators: Refer to the latest manufacturer manual.
Operating Temp: 0 to 60 degrees C
Platform / Compatibility: RX3i Backplane
Limit: 12,072 DNP3 points
Lifecycle: Active
FREQUENTLY ASKED QUESTIONS
Technical Specifications:
Q: What are the maximum power consumption requirements for the 3.3 VDC rail?
A: The maximum power draw is 840 milliamps at 3.3 VDC from the RX3i backplane.
Wiring & Installation:
Q: What physical connectors are used for the Ethernet DNP3 network interface?
A: Two 8-pin shielded RJ-45 ports are used for 10/100 Mbps Ethernet communication.
Troubleshooting & Compatibility:
Q: Which Proficy Machine Edition firmware is required for module configuration?
A: Proficy Machine Edition 8.5 SIM7 or later must be used for configuration.
Replacement & Upgrades:
Q: What is the maximum number of IC695EDS001 modules allowed per RX3i CPU?
A: A maximum of four IC695EDS001 modules can be installed per RX3i CPU.
상품 정보 고시
| Category | Details |
|---|---|
| Product Name | See this page for details |
| Model Name | See this page for details |
| Certification or Licensing Information Required by Law | See this page for details |
| Country of Manufacture or Origin | See this page for details |
| Manufacturer | See this page for details |
| After-sales Service Contact or Customer Support Number | See this page for details |
사용후기
등록된 사용후기
Be the first to leave a review!
상품문의
등록된 상품문의
Be the first to ask a question about this product!
배송정보
교환/반품
