OVERVIEW

Official designation: GE Fanuc IC695ECM850 (PACSystems RX3i, Ethernet Communication Module)

Role/Application: Advanced communication module connecting the RX3i control system to IEC 61850 networks. It acts as an IEC 61850 Client and supports Modbus TCP/IP for robust data exchange.

KEY SPECS SUMMARY

Power: 1100 mA at +5 VDC (maximum)

Interfaces / Ports: 2 RJ-45 ports, 2 SFP cages, 1 micro USB

Indicators: OK, LAN, STATUS, CONN, ACTIVE, USB, and 4 PRT LEDs

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: PACSystems RX3i (CPU firmware 8.05 or higher)

Limit: Supports 1 IP address and 5 MAC addresses

Lifecycle: Active

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What are the supported connection media and data rates for the IC695ECM850 module?

A: The module supports 10/100/1000 Mbps over copper and 100/1000 Mbps over single-mode or multi-mode fiber.

Wiring & Installation:

Q: How many IC695ECM850 modules can be installed per RX3i CPU rack?

A: A maximum of four IC695ECM850 modules can be installed in the main rack of a PACSystems RX3i CPU.

Troubleshooting & Compatibility:

Q: Which CPU firmware version is required for the IC695ECM850 module to function properly?

A: The IC695ECM850 requires the PACSystems RX3i CPU to have firmware version 8.05 or higher.

Replacement & Upgrades:

Q: What current draw changes if SFP transceivers are installed in the module's cages?

A: The current draw increases from 1.2 Amps at +3.3 VDC without SFP to a maximum of 1.9 Amps with two SFPs installed.