OVERVIEW

Official designation: GE Intelligent Platforms IC695ALG728 (PACSystems RX3i, Analog Output Module with HART)

Role/Application: A high-density, single-slot module for the RX3i platform, providing eight configurable non-isolated analog outputs with integrated HART 5.0 protocol for smart device management.

KEY SPECS SUMMARY

Power: 380 mA max at 3.3V backplane; 250 mA max at 24V external

Interfaces / Ports: Requires high capacity terminal block

Indicators: Module OK LED; Refer to the latest manufacturer manual.

Operating Temp: 0 to 60 degrees C

Platform / Compatibility: RX3i Universal Backplane; PME CPU firmware 5.6 or later

Limit: 8 non-isolated channels; Up to 15.9 bits resolution

Lifecycle: Active

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the maximum output settling time for the current signals with HART protocol enabled?

A: The current output settling time is 70 milliseconds with the HART protocol enabled.

Wiring & Installation:

Q: What is the required external field power supply voltage range for the IC695ALG728 module?

A: The module requires an external field power supply voltage range of +19.2 VDC to +30 VDC.

Troubleshooting & Compatibility:

Q: What is the maximum resistance for the current output load when using this module?

A: The maximum output load resistance supported by this module is 850 Ohms.

Replacement & Upgrades:

Q: What is the isolation rating between the field wiring and the RX3i backplane for this module?

A: The module provides 2550 VDC isolation between the field wiring and the backplane for one second.