상품 정보
상품 상세설명
OVERVIEW
Official designation: GE Fanuc IC695CEP001 (PACSystems RX3i, CEP Carrier Module)
Role/Application: An I/O link interface for the RX3i system, enabling a remote node with one I/O module to communicate with a PROFINET IO Local Area Network.
KEY SPECS SUMMARY
Power: 5.25 W at 24 VDC; range 19.2 to 30 VDC
Interfaces / Ports: Two RJ-45 10/100Base-TX, one Micro-B USB
Indicators: PWR1, PWR2, OK, Connect, PRT1, PRT2 LEDs
Operating Temp: 0 degrees C to 60 degrees C
Platform / Compatibility: RX3i Universal Backplanes, PROFINET V2.3
Limit: 1024 bytes total I/O data per station
Lifecycle: Active
FREQUENTLY ASKED QUESTIONS
Technical Specifications:
Q: What is the maximum I/O data size supported by the carrier per station?
A: The carrier supports 1024 bytes total, with 512 bytes input and 512 bytes output.
Wiring & Installation:
Q: What are the dimensions of the IC695CEP001 module?
A: Module dimensions are 177.2 x 51 x 35 millimeters.
Troubleshooting & Compatibility:
Q: Which version of Proficy Machine Edition software is required for this module?
A: Proficy Machine Edition version 8.6 with SIM 3 or later is required.
Replacement & Upgrades:
Q: What is the USB port used for on the CEP Carrier?
A: The Micro-B USB port is intended only for field firmware upgrades using Win Loader.
상품 정보 고시
| Category | Details |
|---|---|
| Product Name | See this page for details |
| Model Name | See this page for details |
| Certification or Licensing Information Required by Law | See this page for details |
| Country of Manufacture or Origin | See this page for details |
| Manufacturer | See this page for details |
| After-sales Service Contact or Customer Support Number | See this page for details |
사용후기
등록된 사용후기
Be the first to leave a review!
상품문의
등록된 상품문의
Be the first to ask a question about this product!
배송정보
교환/반품
