OVERVIEW

Official designation: GE Fanuc IC693MDL730 (Series 90-30, Discrete Output Module)

Role/Application: This 8-point 12-24 VDC positive logic module provides high-side (sourcing) transistor switching for field loads, such as solenoids and indicators, in the Series 90-30 PLC system.

KEY SPECS SUMMARY

Power: 5 VDC, 55 mA from backplane

Interfaces / Ports: One removable 20-screw terminal block

Indicators: Eight green LEDs (output status), one red LED (blown fuse)

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: Universal Series 90-30 baseplates

Limit: 2.0 A per point, 2 A per fuse at 60 degrees C

Lifecycle: Discontinued

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What are the maximum response times for the transistor switching outputs on the MDL730 module?

A: The maximum ON response time is 2 milliseconds and the maximum OFF response time is also 2 milliseconds.

Wiring & Installation:

Q: How is the 8-point output group fused, and what is the current rating of the fuses in the module?

A: The outputs are protected by two 5-Amp fuses, one fuse for points 1-4 and one fuse for points 5-8.

Troubleshooting & Compatibility:

Q: What is the significance of the red LED labeled F located on the front panel of the module?

A: The red LED F indicates that one or both of the module's field power fuses have been blown or opened.

Replacement & Upgrades:

Q: What is the maximum inrush current rating for a single output channel on the IC693MDL730 module?

A: The maximum inrush current rating is 9.4 Amperes for a maximum duration of 10 milliseconds.