OVERVIEW

Official designation: GE Fanuc IC693MDL754 (Series 90-30, Positive Logic Output Module)

Role/Application: A high-density 32-point 12/24 VDC sourcing output module with Electronic Short Circuit Protection (ESCP) for safe switching of field devices in Series 90-30 PLC systems.

KEY SPECS SUMMARY

Power: 5 VDC, 300 mA backplane draw

Interfaces / Ports: One 40-pin connector terminal

Indicators: 32 LEDs (Green for ON, Yellow for Fault)

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: Series 90-30 and RX3i PLC systems

Limit: 0.75 Amperes per point with ESCP

Lifecycle: Discontinued/Obsolete

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the nominal operating voltage and the maximum allowable current per common for this module?

A: The nominal voltage is 12/24 VDC, and the maximum current per 16-point group common is 4 Amperes.

Wiring & Installation:

Q: Does the IC693MDL754 require external fuses, and how is it configured?

A: No, it uses integrated ESCP; configuration is via two DIP switches on the rear of the module.

Troubleshooting & Compatibility:

Q: What status indication is provided to the CPU when a short circuit fault is detected?

A: The module sends 16 bits of status data to the CPU, including point fault indicators.

Replacement & Upgrades:

Q: At what ambient temperature does thermal derating begin for the module outputs?

A: Output current derating begins at ambient temperatures above 40 degrees C (104 degrees F) when operating at 30 VDC.