OVERVIEW

Official designation: GE Fanuc IC693MDL390 (Series 90-30, Isolated AC Output Module)

Role/Application: A 5-point isolated AC output module for the Series 90-30 PLC, capable of switching 85–264 VAC loads with a high inrush capacity for inductive and incandescent devices.

KEY SPECS SUMMARY

Power: 110 mA from 5 VDC backplane

Interfaces / Ports: 20-pin terminal block

Indicators: Five green LEDs (A1-A5) and one red "F" LED

Operating Temp: 0 to 60 degrees C

Platform / Compatibility: GE Fanuc Series 90-30 PLC

Limit: 5 A maximum per module at 45 degrees C

Lifecycle: Discontinued by manufacturer

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the maximum inrush current capacity and the output voltage drop of this module?

A: Maximum inrush current is 25 A for one cycle, with a maximum output voltage drop of 1.5 volts.

Wiring & Installation:

Q: What is the significance of the red "F" indicator light on the output module?

A: The red "F" LED serves as a blown fuse indicator for any of the five output circuits.

Troubleshooting & Compatibility:

Q: What are the maximum output leakage current values at 120 VAC and 240 VAC?

A: Maximum leakage current is 3 mA at 120 VAC and 6 mA at 240 VAC output voltage.

Replacement & Upgrades:

Q: What is the maximum output current rating per module when operating at 60 degrees C?

A: The total output current must not exceed 2.0 A per module when operating at 60 degrees C.