EMERSON
-
ABB -
Allen-Bradley -
Azbil -
BALLUFF -
Baumer -
CATL -
CKD -
COGNEX -
DELTA -
DENSO -
EMERSON -
FANUC -
FESTO -
Fuji -
General Electric -
HITACHI -
HIWIN -
Honeywell -
IFM -
Intel -
KEYENCE -
MITSUBISHI -
MURR ELEKTRONIK -
OMRON -
OPTEX -
Panasonic -
Parker Hannifin -
PEPPERL+FUCHS -
PHOENIX CONTACT -
SAMSON -
SANYO -
SCHMERSAL -
Schneider -
SHARP -
SHIMADZU -
SICK -
SIEMENS -
SMC -
SUNON -
TURCK -
Weidmuller -
WIELAND -
YASKAWA -
YOKOGAWA -
ebm-papst -
CONTRINEX -
EATON -
MOELLER -
Telemecanique -
PILZ
EMERSON IC694BEM320
GE Fanuc (EMERSON) IC694BEM320 Genius Bus Interface Module facilitates high-speed 1536k baud communication and configurable 64/128 I/O for distributed control. This module operates on 500 mA from 5 VDC and supports RX3i compatibility, ensuring stable I/O networking and providing essential troubleshooting and compatibility data and full technical specifications.
US$ 2,141.67
EMERSON IC694BEM321
GE Fanuc (EMERSON) IC694BEM321 Genius Bus Master Module supports up to 16 slave devices and 1024 inputs/outputs for scalable RX3i data exchange. It enables 1536k baud high-speed communication with 500 mA from 5 VDC, ensuring reliable performance and detailing replacement and upgrades alongside full technical specifications.
US$ 2,566.67
EMERSON IC695ALG628
GE Fanuc (EMERSON) IC695ALG628 Analog Input Module features a 24-bit ADC and HART 50 protocol with eight single-ended/four differential channels. It supports voltage and current inputs like 4–20 mA and 1 M-ohm impedance, enabling precise data acquisition and detailing technical specifications for troubleshooting and compatibility.
US$ 2,833.33
EMERSON IC694CEE001
GE Fanuc (EMERSON) IC694CEE001 CEP Carrier provides remote backplane connectivity and two 10/100 Mbps copper ports for PROFINET RT/IRT LAN integration. The accessory ensures reliable data synchronization for distributed control systems with 600 mA from 5 VDC, offering essential wiring and installation details for troubleshooting and compatibility.
US$ 583.33
EMERSON IC695NKT001
GE Fanuc (EMERSON) IC695NKT001 PROFINET I/O Kit features an NIU and ETM001 module with two 10/100 Mbps copper ports for RX3i connectivity. The kit enables high-speed Ethernet communication and uses 600 mA from 5 VDC, streamlining replacement and upgrades alongside essential troubleshooting and compatibility.
US$ 6,083.33
EMERSON IC694MDL250
GE Fanuc (EMERSON) IC694MDL250 VAC Discrete Input Module features 16 individually isolated channels for 120 VAC nominal operation in RX3i systems. The module supports a 0–132 VAC range with 60 mA from 5 VDC and provides enhanced signal reliability, offering essential wiring and installation guidelines for troubleshooting and compatibility.
US$ 1,166.67
EMERSON IC695CBL003
GE Fanuc (EMERSON) IC695CBL003 cable ensures reliable energy pack to CPU connectivity within the RX3i PACSystems, supporting diverse power needs including 120/240 VAC, 125 VDC, and 24 VDC. This 0.6 meter industrial cable features standard connectors and RoHS compliance for stable operation worldwide, review the crucial technical specifications and wiring and installation process documentation.
US$ 300.00
EMERSON IC694ALG391
GE Fanuc (EMERSON) IC694ALG391 Analog Output Module integrates seamlessly with RX3i PACSystems PLC, offering two channels for precision signal control in industrial processes. The module supports flexible current ranges of 0–20 mA or 4–20 mA for accurate regulation, view complete technical specifications and replacement and upgrades options documentation.
US$ 1,958.33
EMERSON IC694DSM314
GE Fanuc (EMERSON) IC694DSM314 Motion Mate module is an optional RX3i PACSystems accessory, enabling advanced motion control and precise synchronized multi-axis coordination. Fully compatible with any RX3i CPU, this high-performance module is essential for automation, examine troubleshooting and compatibility guidelines and wiring and installation documentation.
US$ 4,375.00
EMERSON IC694ALG542
GE Fanuc (EMERSON) IC694ALG542 Analog I/O module offers compact control for RX3i PACSystems, featuring four inputs and two outputs for versatile signal interfacing. Supporting both current and voltage types, this module ensures accurate process monitoring in small-scale automation, evaluate replacement and upgrades pathways and troubleshooting and compatibility guidelines.
US$ 2,516.67
EMERSON IC695GCG001
GE Intelligent Platforms (EMERSON) IC695GCG001 is an RX3i PACSystems Dual-Function Gateway, facilitating data exchange between PROFINET and Genius I/O networks using 2 RJ45 and 2 Genius interfaces. Supporting 1024 bytes of I/O data and MRP for redundancy, this module ensures high-capacity communication, consult wiring and installation instructions and technical specifications guides.
US$ 3,375.00
EMERSON IC695ALG106
GE Intelligent Platforms (EMERSON) IC695ALG106 Analog Input Module for RX3i PACSystems provides six isolated channels and a 16-bit ADC for precise signal processing. Channels are individually configurable to support diverse ranges including +-10 V and +-20 mA, access wiring and installation instructions and troubleshooting and compatibility guides here.
US$ 3,966.67
EMERSON IC695CMM004
GE Intelligent Platforms (EMERSON) IC695CMM004 Serial Communication Module provides four independent RS-232/485/422 ports, supporting multi-protocol flexibility for complex industrial control applications. Featuring 500 VDC isolation and high scalability, this module ensures dependable RX3i integration, refer to troubleshooting and compatibility charts and wiring and installation manuals.
US$ 2,933.33
EMERSON IC695ALG728
GE Intelligent Platforms (EMERSON) IC695ALG728 Analog Output Module provides eight non-isolated channels, supporting +-10 VDC and 4-20 mA ranges with 15.9-bit high-resolution precision. This module integrates the HART protocol version 5.0 for advanced diagnostics and control, check troubleshooting and compatibility guidelines and technical specifications documents now.
US$ 3,350.00
EMERSON IC695ALG412
GE Fanuc (EMERSON) IC695ALG412 is a high-precision input module featuring twelve isolated channels for J-C thermocouples and +-150 mV low-level signals. Supporting 32-bit floating-point data for exceptional accuracy in measurement, review complete technical specifications and replacement and upgrades options documentation.
US$ 7,200.00
EMERSON IC694MDL330
GE Fanuc (EMERSON) IC694MDL330 Output Module provides reliable AC control within the RX3i PLC, supporting a rated voltage range of 120 to 240 VAC. Delivering 2 A maximum output current per channel from any I/O slot, this module ensures efficient power switching, examine replacement and upgrades paths and technical specifications documentation.
US$ 1,008.33
EMERSON IC694ALG222
GE Intelligent Platforms (EMERSON) IC694ALG222 Analog Input Module features 8 differential and 16 single-ended channels for precise voltage signal measurement and acquisition. Supporting -10 V to +10 V ranges with high 2.5 mV resolution, this module is essential for automation, access troubleshooting and compatibility charts and wiring and installation guides.
US$ 2,558.33
EMERSON IC694ACC311
GE Fanuc (EMERSON) IC694ACC311 Terminal Block provides 20 screw terminals for secure and organized low-density wiring interfaces in RX3i I/O modules. Weighing 2 pounds and built for durable construction, this block ensures reliable electrical contact, consult wiring and installation instructions and replacement and upgrades documentation.
US$ 1,425.00
EMERSON IC694ALG220
GE Fanuc (EMERSON) IC694ALG220 Analog Input Module provides four high-accuracy channels for fast and reliable analog signal processing in RX3i PACSystems. Offering 1 ms per channel conversion speed but no hot-swap support, this module ensures high-efficiency operation, review full technical specifications and wiring and installation guides.
US$ 1,800.00
EMERSON IC694APU300
GE Fanuc (EMERSON) IC694APU300 High-Speed Counter Module processes pulse train signals with exceptional precision and minimal latency in RX3i PACSystems. Performing real-time local processing to eliminate communication delays, this module is critical for motion control, explore replacement and upgrades options and technical specifications guides.
US$ 1,783.33
EMERSON IC694PSK001
GE Intelligent Platforms (EMERSON) IC694PSK001 Power Sync and Measurement System Kit includes a PSM module and interface cables for complete power analysis. It measures RMS V/A/Power, frequency, and phase relationship for precise grid synchronization, view detailed technical specifications and troubleshooting and compatibility information.
US$ 8,116.67
EMERSON IC695ALG112
GE Fanuc (EMERSON) IC695ALG112 Analog Input Module provides twelve single-ended isolated channels and a 16-bit ADC for high-precision signal acquisition. Supporting both voltage and current ranges up to +-20 mA, this module ensures stable data, consult full technical specifications and troubleshooting and compatibility charts.
US$ 6,008.33
EMERSON IC695ALG704
GE Intelligent Platforms (EMERSON) IC695ALG704 Analog Output Module offers four non-isolated channels, supporting high-precision +-10 VDC and 4-20 mA outputs with 15.9 bits resolution. This module provides versatile signal control for stable RX3i process integration, review troubleshooting and compatibility charts and wiring and installation guides.
US$ 2,166.67
EMERSON IC695SPF002
GE Fanuc Automation (EMERSON) IC695SPF002 SFP Scanner Module enables stable data communication in RX3i PACSystems, operating at a high speed of 100 Mbps. Requiring 3.3 to 5 V power and featuring a compact SFP design, consult full technical specifications and wiring and installation guides for integration.
US$ 425.00
EMERSON IC694MDL241
GE Fanuc (EMERSON) IC694MDL241 Discrete Input Module provides reliable signal detection and stable input performance for RX3i PACSystems. Operating efficiently with a 7 mA input current, this module ensures high operational accuracy, review troubleshooting and compatibility guidelines and wiring and installation guides.
US$ 825.00
EMERSON IC694DSM324
GE Intelligent Platforms (EMERSON) IC694DSM324 Motion Controller Module provides precise, four-axis motion and position control integrated with the RX3i host controller. Enabling synchronized multi-axis control for high-performance automation, check technical specifications and troubleshooting and compatibility guidelines.
US$ 4,325.00
EMERSON IC694ACC300
GE Fanuc (EMERSON) IC694ACC300 Input Simulator Module replicates 8 or 16 point input operation for efficient control system testing without live field wiring. Essential for system debugging and validation, this module enables accurate input behavior replication, find wiring and installation guides and technical specifications here.
US$ 366.67
EMERSON IC695ALG708
GE Fanuc (EMERSON) IC695ALG708 non-isolated analog input module delivers high-precision data acquisition for automation and process control systems. This RX3i PAC unit features 8 configurable channels for 0–20 mA and 0 to 10 VDC inputs with 16-bit resolution and 400 mA @ 5 VDC power, review the technical specifications and wiring and installation guides to ensure optimal performance.
US$ 3,716.67
EMERSON IC695CPK400
GE Fanuc (EMERSON) IC695CPK400 high-performance controller, with rackless design and 64 MB storage, provides flexible control for mission-critical industrial applications. The RX3i unit delivers 32K discrete I/O, MRP and PNSR redundancy, and 10 W @ 5 VDC power, access troubleshooting and compatibility guides for seamless replacement and upgrades planning.
US$ 7,058.33
EMERSON IC694MDL740
GE Fanuc (EMERSON) IC694MDL740 positive logic output module enables reliable DC control in industrial operations with 16 discrete channels organized in two groups. This RX3i unit supports 12–24 VDC and 0.5 A per point, drawing 110 mA total current, access the detailed wiring and installation instructions and full technical specifications prior to system configuration.
US$ 808.33
EMERSON IC695CBL002
GE Fanuc (EMERSON) IC695CBL002 replacement cable connects the CPU to an energy pack, ensuring stable power delivery in PACSystems RX3i setups. The 1 meter cable features a 7-pin keyed connector and supports 120/240 VAC and 125 VDC, review wiring and installation details when considering replacement and upgrades for your system.
US$ 266.67
EMERSON IC695CBL001
GE Fanuc (EMERSON) IC695CBL001 is a high-quality, durable cable for RX3i CPU energy packs, crucial for reliable PACSystems integration in automation systems. The 0.91 meter length cable includes a termination resistor for signal integrity and is EU RoHS compliant, check technical specifications before considering replacement and upgrades to maintain system operation.
US$ 291.67