OVERVIEW

Official designation: GE Intelligent Platforms IC695ALG704 (RX3i PACSystems, Analog Output Module)

This is a 4-channel, non-isolated analog output module for the RX3i platform.

It provides high-precision signal control using a resolution of 15.9 bits for voltage and 0-20 mA output.

The module supports configurable voltage and current output ranges for various process control applications.

KEY SPECS SUMMARY

Power: 320 mA max at 3.3 VDC

Interfaces / Ports: Requires front-mounted terminal block

Indicators: One green LED for Power, one status LED

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: RX3i Universal Backplane, CPU firmware 3.0 or later

Limit: Maximum output load 850 Ohms

Lifecycle: Active or mature, refer to the latest manufacturer manual.

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the maximum power dissipation of the IC695ALG704 module at 24 VDC external power?

A: The maximum power dissipation for the ALG704 is 4.8 Watts at 24 VDC external power.

Wiring & Installation:

Q: What is the required external power supply voltage range for the module's field side power?

A: The external power supply voltage range is 19.2 VDC to 30 VDC (24 VDC nominal).

Troubleshooting & Compatibility:

Q: What is the calibrated accuracy of the analog output at the ambient temperature of 25 degrees C?

A: The calibrated accuracy is 0.15 percent of full scale at 25 degrees C.

Replacement & Upgrades:

Q: What is the analog update rate for all four channels on the IC695ALG704 module?

A: The analog update rate for all four channels is approximately 8 milliseconds.