OVERVIEW

Official designation: SAMSON 6111-0020111711110000.00 (Type 6111, I/P Converter)

Role/Application: Electropneumatic converter that precisely translates a 4 to 20 mA direct-current input signal into a proportional 0.1 to 5 bar pneumatic output for demanding process control tasks.

KEY SPECS SUMMARY

Power: 4 to 20 mA DC input

Interfaces / Ports: 2 male pin electric connection

Indicators: N/A

Operating Temp: Minus 20 to 70 degrees C

Platform / Compatibility: Rail-mounting unit, Type 6109 i/p module

Limit: 5.4 to 10 bar supply air

Lifecycle: Active

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What are the standard electrical input and pneumatic output signal ranges?

A: Standard input is 4 to 20 mA DC, and the pneumatic output is 0.1 to 5 bar.

Wiring & Installation:

Q: What is the type and size of the pneumatic connection on the converter housing?

A: The pneumatic connection is a 1/8 inch NPT female thread.

Troubleshooting & Compatibility:

Q: What is the minimum required air quality standard for the supply air?

A: Air quality must comply with ISO 8573-1:2001, at least Class 4 for particles.

Replacement & Upgrades:

Q: What is the standard load capacity of the electrical input circuit for this converter?

A: The standard version load capacity is less than or equal to 6 V, corresponding to 300 ohms at 20 mA.