OVERVIEW

Official designation: GE Fanuc IC200MDL330 (VersaMax, Discrete Output Module)

Role/Application: Provides 16 individually isolated channels for switching 120 VAC loads, supporting relays, contactors, and indicators in the VersaMax system.

KEY SPECS SUMMARY

Power: 140 mA maximum from backplane

Interfaces / Ports: Requires IC200CHS carrier

Indicators: 16 individual LEDs, 1 OK LED

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: VersaMax Control System

Limit: 0.5A per point, 5.0A inrush for one cycle

Lifecycle: Active

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the continuous isolation voltage rating between the output points?

A: Continuous point to point isolation is rated for 250 VAC.

Wiring & Installation:

Q: What are the minimum and maximum recommended load current ratings per output point?

A: The minimum load current is 10 mA, and the maximum load current is 0.5 A per point.

Troubleshooting & Compatibility:

Q: What internal protection components are included on each 120 VAC output channel?

A: Each output channel is protected by both internal snubber and MOV components.

Replacement & Upgrades:

Q: Are external suppression circuits necessary for the module when switching inductive loads?

A: Yes, use of external suppression circuits is highly recommended for all inductive output loads.