OVERVIEW

Official designation: GE Fanuc IC693MDL350 (Series 90-30, Isolated AC Output Module)

Role/Application: This 16-point isolated output module switches 120/240 VAC loads, providing individual channel isolation and high noise immunity for the Series 90-30 PLC platform.

KEY SPECS SUMMARY

Power: 315 mA at 5 VDC from backplane

Interfaces / Ports: 16 isolated output points

Indicators: LED for terminal block presence

Operating Temp: Refer to the latest manufacturer manual.

Platform / Compatibility: Series 90-30, requires terminal block

Limit: 2A max per point at 30 degrees C

Lifecycle: Discontinued by manufacturer

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the maximum continuous isolation voltage between the field wiring and the backplane?

A: The module provides 250 VAC continuous isolation between the field and backplane.

Wiring & Installation:

Q: What specific GE Fanuc terminal block types are required to use the IC693MDL350 module?

A: The module requires either the IC694TBBX32 or the IC693TBSX32 terminal block to operate.

Troubleshooting & Compatibility:

Q: What is the maximum inrush current the isolated output can handle per cycle?

A: The maximum inrush current is 20 Amps for one full power cycle.

Replacement & Upgrades:

Q: What is the significance of the DIP switch located on the rear of the IC693MDL350 module?

A: The DIP switch selects the default state for the outputs when the CPU is placed into stop mode.