OVERVIEW

Official designation: GE Fanuc IC693MDL241 (Series 90-30, Discrete Input Module)

Role/Application: A 16-point AC/DC input module for Series 90-30 PLCs, accepting 24 VAC/VDC signals with support for positive or negative logic.

KEY SPECS SUMMARY

Power: 80 mA at 5 VDC

Interfaces / Ports: 16 points, single common terminal

Indicators: 16 green LED status indicators

Operating Temp: Refer to the latest manufacturer manual.

Platform / Compatibility: Series 90-30, I/O slot in 5 or 10-slot baseplate

Limit: On response time 12 ms, Off response time 28 ms

Lifecycle: Discontinued

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What are the on-state voltage and off-state voltage requirements for the module to recognize a signal?

A: On-state voltage is 11.5 to 30 VAC/VDC, and off-state voltage is 0 to 4 VAC/VDC.

Wiring & Installation:

Q: What is the isolation rating between the field side and the logic side of the IC693MDL241 module?

A: The module provides 1500 volts RMS isolation between the field side and the logic side.

Troubleshooting & Compatibility:

Q: What is the maximum input current required for an input point to register as on-state?

A: The minimum on-state input current is 3.2 mA, with 7 mA typical at rated voltage.

Replacement & Upgrades:

Q: Is a special terminal block needed for field wiring connections to the module?

A: Refer to the latest manufacturer manual for specific terminal block part numbers and wiring diagrams.