OVERVIEW

Official designation: GE Fanuc IC694PWR330 (PACSystems RX3i, Expansion Power Supply)

Role/Application: High-capacity power supply module for RX3i Serial Expansion Backplanes, supporting wide-ranging AC or DC input and providing total maximum output power of 30 Watts to the expansion base.

KEY SPECS SUMMARY

Power: 30 Watts total output maximum

Interfaces / Ports: Terminal block interface

Indicators: PWR and OK LEDs

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: RX3i Serial Expansion Backplane only

Limit: Total maximum output power is 30 Watts

Lifecycle: Active or Discontinued, varies by model/revision

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What are the specific output power capacities for the different voltages provided?

A: Maximum output is 30 Watts total, including 30 Watts at 5 VDC, 15 Watts at 24 VDC Relay, and 20 Watts at 24 VDC Isolated.

Wiring & Installation:

Q: What are the acceptable input voltage ranges for the AC and DC power sources?

A: The input voltage range is 85 to 264 Volts AC or 100 to 300 Volts DC.

Troubleshooting & Compatibility:

Q: What is the power supply's ride-through time during a power source interruption?

A: The minimum ride-through time is 20 milliseconds, maintaining valid outputs briefly.

Replacement & Upgrades:

Q: Can the IC694PWR330 be installed in the serial expansion backplane with power applied?

A: No, the module should never be installed or removed while power is applied to the backplane.