상품 정보
상품 상세설명
OVERVIEW
Official designation: GE Fanuc IC695PNC001 (PACSystems RX3i, PROFINET Controller Module)
Role/Application: A single-slot module for the RX3i main rack that functions as a PROFINET Version 2.2 General Class A IO-Controller on high-speed industrial Ethernet networks.
KEY SPECS SUMMARY
Power: 1.5 A at 5 VDC; 0.5 A at 3.3 VDC (without SFP)
Interfaces / Ports: Two RJ-45 ports; two SFP Cages
Indicators: Refer to the latest manufacturer manual.
Operating Temp: 0 degrees C to 60 degrees C
Platform / Compatibility: PACSystems RX3i (F/W 7.0+); Universal Backplane only
Limit: Maximum 4 PROFINET Controllers per RX3i CPU
Lifecycle: Active, manufactured by Emerson
FREQUENTLY ASKED QUESTIONS
Technical Specifications:
Q: What are the supported data rates and port types for the IC695PNC001?
A: It supports 10/100/1000 Mbps on copper and 100/1000 Mbps on fiber via SFP.
Wiring & Installation:
Q: What is the minimum required firmware version for the RX3i CPU to use this module?
A: The IC695PNC001 requires the RX3i CPU to have firmware version 7.0 or higher.
Troubleshooting & Compatibility:
Q: Can this PROFINET Controller module be installed in a remote expansion rack?
A: No, the IC695PNC001 must be located in the RX3i main rack and only supports universal backplanes.
Replacement & Upgrades:
Q: What is the maximum number of IO-Devices that one IC695PNC001 module can control?
A: The PROFINET Controller module is capable of supporting up to 64 IO-Devices.
상품 정보 고시
| Category | Details |
|---|---|
| Product Name | See this page for details |
| Model Name | See this page for details |
| Certification or Licensing Information Required by Law | See this page for details |
| Country of Manufacture or Origin | See this page for details |
| Manufacturer | See this page for details |
| After-sales Service Contact or Customer Support Number | See this page for details |
사용후기
등록된 사용후기
Be the first to leave a review!
상품문의
등록된 상품문의
Be the first to ask a question about this product!
배송정보
교환/반품
