OVERVIEW

Official designation: Omron C200HW-CORT21 (C200HW, CANopen Master/Slave Unit)

Role/Application: A CANopen communications interface unit for the C200H series PLC, functioning as a slave or master to exchange data with CANopen compliant devices.

KEY SPECS SUMMARY

Power: 5 V DC / 250 mA (Internal PLC)

Interfaces / Ports: 9-pin D-Sub connector

Indicators: Refer to the latest manufacturer manual.

Operating Temp: 0 degrees C to 55 degrees C

Platform / Compatibility: C200H, CS1 Series PLCs

Limit: Communication speed up to 1 Mbit per second

Lifecycle: Obsolete

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the primary communication role supported by the C200HW-CORT21 module on the network?

A: The module is typically configured to operate as a CANopen Slave or Master station.

Wiring & Installation:

Q: What is the recommended cable and connector type for the CANopen network connection on the module?

A: A shielded two-wire cable is recommended, connecting to the 9-pin D-Sub connector.

Troubleshooting & Compatibility:

Q: How is the CANopen node address for the C200HW-CORT21 module typically configured or set?

A: The node address is set via DIP switches on the unit or configured through system software.

Replacement & Upgrades:

Q: What is the suggested successor module for the obsolete C200HW-CORT21 in newer Omron PLC systems?

A: The Omron CJ1W-CORT21 is often cited as a modern alternative for CANopen applications.