OVERVIEW

Official designation: Allen-Bradley 1732E-12X4M12P5QCDR (ArmorBlock I/O, Digital Combination Block)

Role/Application: A hardened, dual-port EtherNet/IP I/O module with 12 sink inputs and 4 source outputs. Features M12 quick connect I/O and network ports for on-machine mounting and DLR topology.

KEY SPECS SUMMARY

Power: 12-30V DC operating range

Interfaces / Ports: Dual M12 D-code network, M12 I/O, 5-pin mini auxiliary power

Indicators: NET, MOD, Link, 16 I/O status LEDs

Operating Temp: -20 degrees C to 60 degrees C

Platform / Compatibility: EtherNet/IP, DLR support, IP67/69K rating

Limit: 0.5 Amps output per port, 4 Amps max module output

Lifecycle: Active Mature

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the rated input voltage range for this module's power and signals?

A: The module is designed to operate with a voltage range of 12 to 30V DC.

Wiring & Installation:

Q: What is the required torque for mounting the module directly to a machine or panel?

A: Mounting screws must be torqued to 1.13 Newton-meters (10 inch-pounds).

Troubleshooting & Compatibility:

Q: How is the module's IP address configured during initial installation?

A: The IP address is set using the three front-mounted rotary switches or by using DHCP.

Replacement & Upgrades:

Q: What type of Ethernet cable should be used for the M12 D-code ports to ensure performance?

A: Use four-conductor twisted pair CAT5E UTP or STP cables with M12 connectors.