OVERVIEW

Official designation: IFM PN5006 (PN Series, Pressure Sensor with Display)

Role/Application: Digital pressure switch for monitoring 0 to 2.5 bar relative pressure of liquids and gases in industrial automation systems, featuring a high cycle life.

KEY SPECS SUMMARY

Power: 18 to 36 V DC

Interfaces / Ports: M12 connector with 4 gold plated contacts

Indicators: 3 x LED, green, for switching status

Operating Temp: Minus 20 degrees C to 80 degrees C

Platform / Compatibility: Pressure rating 20 bar, IP65 protection

Limit: Set point range 0.02 to 2.5 bar

Lifecycle: Discontinued, replacement is PN7096

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the characteristics deviation or overall accuracy of the PN5006 sensor?

A: The sensor characteristics deviation is less than or equal to plus minus 0.25 percent of the span (BFSL).

Wiring & Installation:

Q: What are the specific output type and pin assignment for the M12 connector?

A: It has one PNP NO/NC digital output, using pin 4 for the switch output.

Troubleshooting & Compatibility:

Q: What is the minimum bursting pressure that the sensor can withstand before mechanical failure?

A: The minimum bursting pressure for the sensor is 50 bar, ensuring a high safety margin.

Replacement & Upgrades:

Q: What is the main replacement for the PN5006 model and is it fully compatible?

A: The current replacement model is PN7096; carefully review its datasheet for any technical differences.