GE Fanuc (EMERSON) IC695PSA040 AC/DC Power Supply accepts 85–264 VAC or 100–300 VDC input to deliver 40 watts of total output power, including 6 A at 5.1 VDC, operating safely across 0 C to 60 C with an Internal Fuse. Refer to the technical specifications for input frequency and current ratings, and utilize troubleshooting and compatibility guides to ensure reliable power distribution across your RX3i system components.

GE Fanuc (EMERSON) IC695NIU001 Network Interface Unit acts as a bridge for RX3i and Series 90-30 I/O, featuring Dual RS-232/485 ports for SNP/Modbus RTU protocols, 10 MB Flash memory, and requiring the IC695ETM001 for EGD communication and networking. Review the technical specifications to confirm the 550 mA @ 5 VDC backplane current draw and utilize firmware upgrades to ensure long-term system compatibility and scalability.

GE Fanuc (EMERSON) IC695ACC400 Energy Pack Module (Lithium-Ion) provides 1.5 to 3 seconds of backup power for RX3i CPUs like the CPE310 during power loss, featuring a typical lifespan exceeding 10 years and safe operation between 0 C and 60 C. Consult system replacement and upgrades documentation for end-of-life planning and review technical specifications to ensure seamless integration with your PACSystems RX3i controller module.

GE Fanuc (EMERSON) IC695ETM001 Ethernet Module provides high-speed communication and networking for RX3i, featuring 2 Isolated RJ45 ports for 10/100 Mbps Ethernet/IP and EGD protocols, requiring 350 mA at 5 VDC from the backplane. Check the technical specifications for details on the 9-pin Sub-D Station Manager connector functionality and proper configuration procedures for resilient industrial network deployment.

GE Fanuc (EMERSON) IC694ACC310 Slot Filler Module is a Single Slot, Non-electronic unit drawing 0 mA, designed to protect unused RX3i backplane slots from dust, debris, and EMI/RFI interference. Consult the technical specifications for enclosure material details and review replacement and upgrades options to ensure continuous mechanical stability and environmental protection for the control system.

GE Fanuc (EMERSON) IC695ACC302 Auxiliary Smart Battery Module delivers 3 VDC output, 15 Ah capacity, and up to 200 days RAM memory backup for PACSystems RX3i/RX7i controllers. This smart lithium module features a flame-retardant ABS plastic casing and a 7 years nominal shelf life, ensuring reliable industrial automation performance; learn key technical specifications and replacement and upgrades for your system needs.

GE Fanuc (EMERSON) IC695CHS007 universal backplane provides a reliable foundation for PACSystems RX3i, supporting IC695/4/3 modules across 7 slots. This passive backplane features a dual bus architecture, isolated 24 VDC terminal strip, and 0 to 60 C operating range; review wiring and installation tips and technical specifications for optimal configuration.

GE Fanuc (EMERSON) IC695CPE305 is a high-speed CPU module for PACSystems RX3i, featuring a 1.1 GHz processor and 5 MB RAM with non-volatile memory. This controller achieves a fast 0.72 ms scan rate and provides dual serial (RS-232/485) and Ethernet/USB ports; discover current troubleshooting and compatibility guidelines and replacement and upgrades options.

GE Fanuc (EMERSON) IC695CHS012 is a 12-slot universal backplane for PACSystems RX3i, supporting PCI/serial bus architectures and module hot-swapping. This dual bus backplane is rated at 600 mA at 3.3 VDC and 240 mA at 5 VDC, ensuring a 0 to 60 C operating range; review detailed wiring and installation procedures and technical specifications for system deployment.

GE Fanuc (EMERSON) IC630CCM300 Versamax Data Communication Module ensures effective network communications with a 0 C to 60 C operating range and a required 5V DC power input. This robust DCM, featuring an interface of switches, LEDs, and ports, is designed for efficient DIN Rail mount deployment, check technical specifications and explore replacement and upgrades guidance before purchasing the unit.