OVERVIEW

Official designation: GE Fanuc IC200NDD010 (VersaMax Nano PLC, CPU Module)

Role/Application: This compact controller provides logic execution with six 12 VDC inputs and four 12 VDC transistor outputs, featuring an RS-232 port for industrial automation.

KEY SPECS SUMMARY

Power: 12 VDC nominal, 100 mA backplane

Interfaces / Ports: RS-232 and RS-485 serial ports

Indicators: Status LED for each I/O point

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: VersaMax Nano, DIN rail or panel mount

Limit: 0.7 A max per output, 4 A max per common

Lifecycle: Refer to the latest manufacturer manual.

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the program memory size and boolean execution time for this CPU?

A: The CPU features 2K words of flash memory and a 1.2 microsecond boolean execution time.

Wiring & Installation:

Q: What are the input and output response times for the IC200NDD010 Nano PLC?

A: The response time is 0.5 ms for ON state and 1.5 ms for OFF state.

Troubleshooting & Compatibility:

Q: What communication protocols are supported by the serial ports on the IC200NDD010?

A: The RS-232 and RS-485 ports support SNP, Modbus RTU Slave, and Serial Read/Write commands.

Replacement & Upgrades:

Q: What programming software is compatible with the IC200NDD010 Nano PLC controller?

A: The controller is programmed using VersaPro version 2.03 or later, or Machine Edition 2.6 or later.