OVERVIEW

Official designation: GE Fanuc IC200ALG431 (VersaMax, Analog Mixed I/O Module)

Role/Application: This mixed analog module provides four 0 to 10 VDC inputs and two 0 to 10 VDC outputs with 12-bit resolution for continuous process monitoring and control.

KEY SPECS SUMMARY

Power: 18 to 30 V DC (External)

Interfaces / Ports: 4 inputs and 2 outputs

Indicators: OK (Backplane) and FLD PWR (Field)

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: VersaMax I/O Carrier

Limit: 12-bit resolution, 0.4 ms update rate

Lifecycle: Active

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What are the primary signal ranges for the input and output channels of the IC200ALG431?

A: Both the four inputs and two outputs operate with a 0 to 10 VDC unipolar voltage range.

Wiring & Installation:

Q: What type of wiring is recommended for all analog channel connections to minimize noise?

A: Shielded twisted pair cable is highly recommended for all analog channel connections.

Troubleshooting & Compatibility:

Q: What action should be taken if the backplane power supply to the module is lost?

A: A jumper can be set to hold the last state or default the outputs to 0 VDC upon power loss.

Replacement & Upgrades:

Q: What is the minimum resistive load required for proper operation of the voltage outputs?

A: The minimum required resistive load for the voltage outputs is 5000 Ohm.