OVERVIEW

Official designation: GE Fanuc IC200MDL632 (VersaMax, Discrete Input Module)

Role/Application: This 16-point isolated input module detects 125 VDC signals, supporting both positive and negative logic for use in the VersaMax I/O platform.

KEY SPECS SUMMARY

Power: 80 mA max from backplane (5V)

Interfaces / Ports: Terminal block for 16 discrete inputs

Indicators: 16 green status LEDs, 1 green OK LED

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: VersaMax I/O system carrier

Limit: 150 VDC maximum input voltage

Lifecycle: Refer to the latest manufacturer manual.

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the typical input impedance and response time for this module at nominal voltage?

A: Input impedance is typically 74 K Ohm at 125 VDC, with a maximum on/off response time of 0.5 ms.

Wiring & Installation:

Q: What are the isolation ratings between the user input, logic, and frame ground?

A: Isolation is 250 VAC continuous and 1500 VAC for 1 minute for all isolated groups.

Troubleshooting & Compatibility:

Q: How is the input delay or filter time configured to mitigate noise or switch bounce?

A: Filter time is user-configurable to 0 ms, 1.0 ms (default), or 7.0 ms to suppress noise.

Replacement & Upgrades:

Q: Does the module require an external power source for the input circuits to operate?

A: No, the IC200MDL632 module is powered entirely by the backplane power provided by the system.