OVERVIEW

Official designation: GE Fanuc IC200MDL636 (VersaMax, Discrete Input Module)

Role/Application: This 32-point input module is designed for high-density signal acquisition, supporting 48 VDC positive/negative logic, commonly used in high-voltage DC sensing applications.

KEY SPECS SUMMARY

Power: Nominal 48 VDC (0 to 60 VDC range)

Interfaces / Ports: Four 8-point groups to carrier

Indicators: 32 per-point LEDs, OK LED

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: VersaMax I/O Carrier required

Limit: On-state 34 to 60 VDC

Lifecycle: Active (Refer to the latest manufacturer manual.)

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the factory default filter time setting for this input module?

A: The input filter time is configurable from 0 to 7 milliseconds, with a 1 millisecond default.

Wiring & Installation:

Q: What are the minimum and maximum wire sizes accepted by the terminal base connectors?

A: Terminals accept AWG #24 to AWG #12 wire, solid or stranded, with certain limits for two wires.

Troubleshooting & Compatibility:

Q: Does the module provide isolation between every single input point on the unit?

A: No, isolation is provided only between the four 8-point groups and between the groups and backplane.

Replacement & Upgrades:

Q: What is the module's primary nominal voltage, and can it be used with 24 VDC sensors?

A: The nominal voltage is 48 VDC, but the 0 to 60 VDC range allows use with 24 VDC sources.