OVERVIEW

Official designation: GE Fanuc IC693MDL731 (Series 90-30, Discrete Output Module)

Role/Application: This 8-point, 12/24 VDC Negative Logic transistor output module provides digital control for industrial loads, sinking 2 Amps maximum per point from the load to the common bus.

KEY SPECS SUMMARY

Power: 55 mA at 5 VDC (internal)

Interfaces / Ports: 8 output points, 20-screw terminal block

Indicators: 8 green LEDs, one red blown fuse LED

Operating Temp: 0 degrees C to 60 degrees C

Platform / Compatibility: Series 90-30 PLC systems

Limit: 2 amps maximum per point

Lifecycle: Refer to the latest manufacturer manual.

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the maximum voltage isolation rating between the field and logic side of the module?

A: The IC693MDL731 provides isolation rated at 1500 volts AC between the field and logic sides.

Wiring & Installation:

Q: What is the current rating of the fuses protecting the output groups on this module?

A: The module contains two 5 amp fuses, each protecting four of the eight output points.

Troubleshooting & Compatibility:

Q: What is the maximum on and off response time for the transistor output points?

A: Both the maximum On response time and the maximum Off response time are 2 milliseconds.

Replacement & Upgrades:

Q: Is this negative logic module interchangeable with the positive logic IC693MDL730 output module?

A: No, the IC693MDL731 is a negative logic (sinking) module and is not directly interchangeable with the positive logic IC693MDL730 (sourcing) module.