OVERVIEW

Official designation: GE Fanuc IC693MDL742 (Series 90-30, Discrete DC Output Module)

Role/Application: A 16-point discrete output module for the Series 90-30 PLC, providing 12 to 24 VDC positive logic sourcing outputs with Electronic Short Circuit Protection (ESCP).

KEY SPECS SUMMARY

Power: 130 mA maximum from 5 V bus

Interfaces / Ports: 20-pin terminal connector

Indicators: 16 Green LEDs (A1-A8, B1-B8), 1 Red LED (F)

Operating Temp: 0 degrees C to plus 60 degrees C

Platform / Compatibility: Series 90-30 PLCs

Limit: 1 A maximum per point, 4 A maximum per group at 50 degrees C

Lifecycle: Discontinued

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the isolation voltage rating between the field side and the logic side of the module?

A: The isolation rating between the field side and the logic side is 1500 volts.

Wiring & Installation:

Q: How are the 16 output points organized and powered within the module?

A: The 16 outputs are organized into two groups of eight, each with its own common power output terminal.

Troubleshooting & Compatibility:

Q: What function does the red F LED indicator on the module serve?

A: The red F LED indicates a tripped short circuit fault for an output group.

Replacement & Upgrades:

Q: What is the group current capacity limit if the operating temperature is 60 degrees C?

A: The maximum group current capacity is derated to 3 Amperes when operating at 60 degrees C.