OVERVIEW

Official designation: GE Fanuc IC694MDL310 (RX3i PACSystems, Output Module)

Role/Application: A 12-point, 120 VAC discrete output module for the RX3i platform, providing two isolated groups of six outputs, each protected by a 3 Amp fuse for industrial control switching applications.

KEY SPECS SUMMARY

Power: 210 mA from 5V bus (all outputs on)

Interfaces / Ports: 12 output points (2 groups of 6)

Indicators: Status LEDs (F red LED for fuse)

Operating Temp: 0 to 60 degrees C

Platform / Compatibility: Universal RX3i backplane slot

Limit: 0.5 Amp maximum per point

Lifecycle: Active

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the maximum output voltage range and frequency supported by the IC694MDL310 module?

A: The output voltage range is 85 to 132 V AC with operation supported at 50 or 60 Hz.

Wiring & Installation:

Q: What is the continuous isolation rating between the field side and the backplane or frame ground?

A: Continuous isolation is rated at 250 V AC between field to backplane and to frame ground.

Troubleshooting & Compatibility:

Q: What is the maximum inrush current capacity for the output points to handle inductive loads?

A: The output points can withstand a maximum inrush current of 5 Amps for one cycle.

Replacement & Upgrades:

Q: What fuse part number is used for the group protection in the IC694MDL310 output module?

A: The module uses two 3 Amp fuses, part number 44A724627-111, to protect each output group.