OVERVIEW

Official designation: GE Fanuc IC694MDL930 (PACSystems RX3i, Isolated Relay Output Module)

Role/Application: This digital output module provides eight isolated Form A (Normally Open) relay circuits for controlling both AC and DC field loads within an RX3i PACSystems platform.

KEY SPECS SUMMARY

Power: 6mA at 5VDC from backplane

Interfaces / Ports: One 20-pin terminal block (connector)

Indicators: Eight individual LEDs for output status

Operating Temp: 0 to 60 degrees C

Platform / Compatibility: PACSystems RX3i, compatible with Series 90-30

Limit: 4 Amps resistive max per output, 20 Amps max per module

Lifecycle: Active, previously GE Fanuc, now Emerson Automation

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What are the voltage and current ranges for the relay outputs?

A: The outputs operate from 5 to 30 VDC or 5 to 250 VAC, with a 4 Amp maximum resistive load per point.

Wiring & Installation:

Q: What is the required current draw from the 5V backplane bus?

A: The module draws a maximum of 6 milliamps from the backplane 5V bus when all outputs are on.

Troubleshooting & Compatibility:

Q: What is the maximum response time for the relay output switching?

A: The maximum on and off response time for the relay circuits is 15 milliseconds.

Replacement & Upgrades:

Q: Is this RX3i module capable of being inserted or removed while power is applied?

A: Yes, the module is designed to support hot-swap capability.