OVERVIEW

Official designation: GE Fanuc IC695ALG616 (PACSystems RX3i, Analog Input Module)

Role/Application: This non-isolated module provides 16 single-ended or 8 differential channels for high-resolution measurement of various voltage and current analog signals within the RX3i platform.

KEY SPECS SUMMARY

Power: 5V at 600mA, 3.3V at 450mA from backplane

Interfaces / Ports: Requires separate 32-point terminal block

Indicators: N/A

Operating Temp: 0 to 60 degrees C

Platform / Compatibility: PACSystems RX3i, firmware 3.0 or later

Limit: Overvoltage to plus/minus 60 VDC continuous

Lifecycle: Active, manufactured by Emerson Automation

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What are the primary current and voltage input signal ranges supported by this module?

A: Supported current ranges are 0 to 20 mA, 4 to 20 mA, and plus/minus 20 mA.

Wiring & Installation:

Q: Which separate terminal block types are compatible with the IC695ALG616 module?

A: Compatible blocks include the box-style (IC694TBB032) and spring-style (IC694TBS032) versions.

Troubleshooting & Compatibility:

Q: What is the ADC conversion resolution and the typical common mode noise rejection?

A: The module features a 24-bit ADC and provides common mode rejection exceeding 120 dB at 50/60 Hz.

Replacement & Upgrades:

Q: What software version is required to configure the IC695ALG616 module in the PLC program?

A: Configuration requires Machine Edition Version 5.0 SP3 Logic Developer-PLC or later.