OVERVIEW

Official designation: Omron CS1W-NC413 (SYSMAC CS1 Series, Position Control Unit)

Role/Application: This special I/O unit performs four-axis open-loop positioning by generating pulse train output for step or servo motor drivers.

KEY SPECS SUMMARY

Control Axes: 4 axes

Control Output: Open-collector pulse train

Internal Power: 5 VDC

Internal Consumption: 360 mA max at 5 VDC

External Power: 24 VDC external supply

External Consumption: 90 mA max at 24 VDC

Max Pulse Rate: 500 kpps

Position Range: plus/minus 1,073,741,823 pulses

I/O Allocation: 20 words, 1 slot

Operating Temp: 0 to 55 degrees C

Weight: 0.3 kg max

Lifecycle: Commercialized

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the maximum pulse frequency output the CS1W-NC413 can generate for a motor driver?

A: The unit supports a maximum command pulse frequency of 500 kpps.

Wiring & Installation:

Q: Which type of cable is recommended for connecting the position control unit to a servo driver?

A: Omron recommends specific shielded cables, such as XW2Z-100J-A7, for connection to OMNUC G or SMARTSTEP drivers.

Troubleshooting & Compatibility:

Q: What are the two primary positioning operation modes available on this control unit?

A: The two primary modes are memory operation and direct operation using ladder commands.

Replacement & Upgrades:

Q: Is there an equivalent line-driver output model in the CS1W-NC series for enhanced noise immunity?

A: The line-driver version for four axes is the CS1W-NC433.