상품 정보
상품 상세설명
OVERVIEW
Official designation: Omron CJ1W-ID261 (CJ Series, DC Digital Input Unit)
Role/Application: A high-density, 64-point DC input module for CJ-series PLCs, supporting both NPN and PNP sensor types and featuring adjustable noise filtering for industrial signal acquisition.
KEY SPECS SUMMARY
Power: 5 VDC 90 mA max (internal)
Interfaces / Ports: Fujitsu/OTAX connector (two per unit)
Indicators: Refer to the latest manufacturer manual.
Operating Temp: 0 to 55 degrees C
Platform / Compatibility: CJ1 Series PLC I/O Bus
Limit: 50 percent points simultaneously ON
Lifecycle: Active
FREQUENTLY ASKED QUESTIONS
Technical Specifications:
Q: What is the rated input current and response time of the CJ1W-ID261 inputs?
A: The typical input current is 4.1 mA at 24 VDC, and the response time is 8.0 ms maximum, adjustable from 0 to 32 ms.
Wiring & Installation:
Q: What are the physical dimensions of the CJ1W-ID261 unit for panel mounting?
A: The unit dimensions are 31 mm wide, 90 mm high, and 112.5 mm deep.
Troubleshooting & Compatibility:
Q: Does the CJ1W-ID261 require separate settings for NPN versus PNP input devices?
A: No, the 24 VDC models can connect to NPN or PNP outputs without requiring manual polarity selection.
Replacement & Upgrades:
Q: What are the compatible connector part numbers for the two 40-pin Fujitsu/OTAX interfaces?
A: Compatible connectors include the Fujitsu FCN-361J040-AU or the OTAX N360C040J2 for a cover.
상품 정보 고시
| Category | Details |
|---|---|
| Product Name | See this page for details |
| Model Name | See this page for details |
| Certification or Licensing Information Required by Law | See this page for details |
| Country of Manufacture or Origin | See this page for details |
| Manufacturer | See this page for details |
| After-sales Service Contact or Customer Support Number | See this page for details |
사용후기
등록된 사용후기
Be the first to leave a review!
상품문의
등록된 상품문의
Be the first to ask a question about this product!
배송정보
교환/반품
