OVERVIEW

Official designation: Omron C200HW-SLK24 (C200HW, Controller Link Slave Module)

Role/Application: A high-speed SYSMAC LINK network slave unit for C200H series PLCs, supporting data link communications at 2 Mbps over coaxial cable.

KEY SPECS SUMMARY

Power: 0.30 A at 5 V DC

Interfaces / Ports: Coaxial, D-Sub (9-pin)

Indicators: RUN, COM, ERR, ALM

Operating Temp: 0 degrees C to 55 degrees C

Platform / Compatibility: C200H CPU rack backplane slot

Limit: Up to 2,966 data link words

Lifecycle: Discontinued, replaced by CS/CJ series

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the maximum number of network nodes supported by the Controller Link system using this module?

A: The SYSMAC LINK network supports a maximum of 32 nodes when using this coaxial type unit.

Wiring & Installation:

Q: What is the recommended cable specification for establishing a reliable network connection with the C200HW-SLK24?

A: The coaxial cable connection requires a 75-ohm double-shielded type cable.

Troubleshooting & Compatibility:

Q: What diagnostic function is available in the SYSMAC LINK system to check network communication problems?

A: The Internode Echo Test function is available to aid in communications troubleshooting.

Replacement & Upgrades:

Q: What is the recommended modern Omron network module to replace the functionality of the C200HW-SLK24?

A: CJ1W-CLK21-V1 or CS1W-CLK21-V1 are generally recommended for network upgrades from SYSMAC LINK.