OVERVIEW

Official designation: Omron C200H-DA001 (C200H, Analog Output Module)

Role/Application: This digital-to-analog (D/A) output module converts 12-bit binary data from the C200H PLC into two channels of selectable voltage or current signals for external devices.

KEY SPECS SUMMARY

Power: 5 VDC, 650 mA maximum consumption

Interfaces / Ports: 2 analog outputs, 19-pin terminal block

Indicators: Refer to the latest manufacturer manual.

Operating Temp: 0 to 55 degrees Celsius

Platform / Compatibility: C200H series PLC backplane

Limit: 2.5 ms maximum conversion time per point

Lifecycle: Obsolete, replacement is CS1W-DA08V/C or CJ1W-DA08V/C

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the primary output resolution and overall accuracy of the C200H-DA001 module?

A: The module has a 12-bit resolution (1/4095 max) with an accuracy of plus or minus 0.5 percent at 25 degrees C.

Wiring & Installation:

Q: What are the maximum load resistance and maximum output current for the current output range?

A: The current output has a maximum load resistance of 400 Ohm and a maximum voltage output current of 15 mA.

Troubleshooting & Compatibility:

Q: What is the isolation type provided on the C200H-DA001 analog output module?

A: Photocoupler isolation is provided between the output terminals and the personal computer (PC), but not between the two output terminals.

Replacement & Upgrades:

Q: What are the recommended replacement modules for the obsolete C200H-DA001 Analog Output Unit?

A: Recommended replacements include the Omron CS1W-DA08V/C or the Omron CJ1W-DA08V/C analog output modules.