상품 정보
상품 상세설명
OVERVIEW
Official designation: Allen-Bradley 20-COMM-E (PowerFlex, EtherNet/IP Communication Adapter)
Role/Application: Adapter providing EtherNet/IP protocol connectivity for PowerFlex 70 and 700 series drives, supporting 10/100 Mbps data rates for industrial control systems.
KEY SPECS SUMMARY
Power: 350 mA at 5V DC from host
Interfaces / Ports: One RJ45, 20-pin DPI
Indicators: Refer to the latest manufacturer manual.
Operating Temp: Minus 10 degrees C to 50 degrees C
Platform / Compatibility: PowerFlex 70, 700, 750 Series
Limit: 5 percent to 95 percent non-condensing
Lifecycle: ACTIVE Mature
FREQUENTLY ASKED QUESTIONS
Technical Specifications:
Q: What are the supported data rates and duplex modes for the 20-COMM-E adapter?
A: The adapter supports 10 Mbps and 100 Mbps data rates in both Full and Half Duplex modes.
Wiring & Installation:
Q: What is the physical connector type used for the EtherNet/IP network connection on the adapter?
A: The adapter uses one standard RJ45 connector for its connection to the Ethernet/IP network.
Troubleshooting & Compatibility:
Q: What is the minimum Request Packet Interval (RPI) supported by the adapter for I/O connections?
A: The adapter supports a minimum Request Packet Interval (RPI) of 5 milliseconds for data exchange.
Replacement & Upgrades:
Q: Is the 20-COMM-E adapter compatible for use with PowerFlex 750 Series drives?
A: Yes, firmware revision 4.001 and later of the adapter supports use with PowerFlex 750-Series drives.
상품 정보 고시
| Category | Details |
|---|---|
| Product Name | See this page for details |
| Model Name | See this page for details |
| Certification or Licensing Information Required by Law | See this page for details |
| Country of Manufacture or Origin | See this page for details |
| Manufacturer | See this page for details |
| After-sales Service Contact or Customer Support Number | See this page for details |
사용후기
등록된 사용후기
Be the first to leave a review!
상품문의
등록된 상품문의
Be the first to ask a question about this product!
배송정보
교환/반품
