OVERVIEW

Official designation: Allen-Bradley 1606-XL480E (1606-XL Series, Switched Mode Power Supply)

Role/Application: This 480 Watt DIN rail power supply delivers 20 Amperes of adjustable 24 to 28 Volts DC output for high-power industrial automation and control systems.

KEY SPECS SUMMARY

Power: 480 Watts, 20 Amperes at 24 Volts DC

Interfaces / Ports: Screw terminals for AC input and DC output

Indicators: One Green LED for DC-OK status

Operating Temp: 0 to 70 degrees C, derating above 60 degrees C

Platform / Compatibility: DIN rail mount, IP20 protection

Limit: Hold-up time is greater than 20 milliseconds

Lifecycle: Existing product line

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the rated input current and inrush current for the power supply at 230 Volts AC?

A: The nominal input current is 5 Amperes, and the typical inrush current is 33 Amperes at 264 Volts AC.

Wiring & Installation:

Q: What are the physical dimensions and recommended wire size for the 1606-XL480E module?

A: The dimensions are 65 millimeters wide by 124 millimeters high by 127 millimeters deep, accepting 20 to 10 AWG wire.

Troubleshooting & Compatibility:

Q: What is the continuous input voltage tolerance range for AC and DC operation?

A: Continuous operation is tolerated between 184 to 264 Volts AC or 270 to 370 Volts DC.

Replacement & Upgrades:

Q: What is the maximum continuous current available when the unit is operating in parallel mode?

A: Refer to the latest manufacturer manual for specifications regarding parallel operation limits.