상품 정보
상품 상세설명
OVERVIEW
Official designation: Panasonic BR-2/3AGCT4A (BR Series, Primary Lithium PLC Battery Pack)
Role/Application: A 6 V lithium battery pack primarily used for absolute position encoder and memory backup in industrial CNC and PLC systems, offering a long service life.
KEY SPECS SUMMARY
Power: 6 V nominal
Interfaces / Ports: Wire leads with JAE connector
Indicators: Refer to the latest manufacturer manual.
Operating Temp: Minus 40 to 85 degrees C
Platform / Compatibility: Fanuc 18-T and Alpha iSV systems
Limit: Rated capacity 2400 mAh
Lifecycle: Active, widely available
FREQUENTLY ASKED QUESTIONS
Technical Specifications:
Q: What is the capacity of the BR-2/3AGCT4A battery pack in amp-hours?
A: The typical capacity for this 4-cell lithium battery pack is 2.4 Ah.
Wiring & Installation:
Q: What precautions should be taken when replacing the battery in a CNC machine to avoid data loss?
A: Keep the CNC machine powered ON with the Emergency Stop engaged during replacement.
Troubleshooting & Compatibility:
Q: What is the typical alarm displayed on a CNC system when the absolute encoder battery is low?
A: A RED or YELLOW BAT alarm or APC alarm often signals a low battery condition.
Replacement & Upgrades:
Q: Does the BR-2/3AGCT4A replace older Fanuc battery packs, such as the twin pack C size batteries?
A: Yes, it replaces older twin pack C size batteries used in Fanuc Alpha i series servo systems.
상품 정보 고시
| Category | Details |
|---|---|
| Product Name | See this page for details |
| Model Name | See this page for details |
| Certification or Licensing Information Required by Law | See this page for details |
| Country of Manufacture or Origin | See this page for details |
| Manufacturer | See this page for details |
| After-sales Service Contact or Customer Support Number | See this page for details |
사용후기
등록된 사용후기
Be the first to leave a review!
상품문의
등록된 상품문의
Be the first to ask a question about this product!
배송정보
교환/반품
