OVERVIEW

Official designation: PILZ PNOZ X2P (PNOZ X, Safety relay)

Role/Application: A safety relay module that monitors E-STOP and safety gate inputs using 1- or 2-channel wiring to achieve safety requirements up to Cat. 4/PL e.

KEY SPECS SUMMARY

Power: 24 V AC/DC; 2 W/4.5 VA consumption

Interfaces / Ports: Plug-in screw or spring terminals

Indicators: 3 LEDs for power (Power), channel 1 (CH.1), and channel 2 (CH.2)

Operating Temp: Minus 10 to 55 degrees C ambient

Platform / Compatibility: E-STOP, Safety Gate, Cat. 4 / PL e / SIL CL 3

Limit: 6 A max current at 240 V AC or 6 A max current at 24 V DC

Lifecycle: Active product within the PNOZ X safety relay series

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the minimum input resistance for the E-STOP circuit to ensure safe operation?

A: The minimum input resistance required for DC input circuits at power-on is 21 Ohm.

Wiring & Installation:

Q: What are the main physical dimensions of the PNOZ X2P and how should it be mounted?

A: Dimensions are 94 mm H, 22.5 mm W, 121 mm D, mountable in any position on a DIN rail.

Troubleshooting & Compatibility:

Q: What are the functions of the three diagnostic LEDs on the front of the unit?

A: The LEDs indicate the status of the power supply (Power), safety channel 1 (CH.1), and safety channel 2 (CH.2).

Replacement & Upgrades:

Q: Is the PNOZ X2P considered current or is there a recommended PNOZsigma alternative?

A: The PNOZ X2P is active, but the PNOZsigma series, such as the PNOZ S2, is the recommended alternative.