OVERVIEW

Official designation: CKD F3000-10-W-F1 (F3000 Series, Pneumatic Filter)

Role/Application: This air filter removes moisture and particulate matter down to 5 microns from compressed air lines, featuring an automatic drain and polycarbonate bowl to ensure a clean, stable pneumatic supply.

KEY SPECS SUMMARY

Power: Not applicable, passive pneumatic device

Interfaces / Ports: Rc 3/8 port size, 12 cm3 drain capacity

Indicators: Differential pressure detection port optional

Operating Temp: 5 degrees C to 60 degrees C

Platform / Compatibility: Modular type F.R.L. system, Bowl guard standard

Limit: Max working pressure 1.0 MPa, Filtration 5 micrometers

Lifecycle: Current model, Refer to the latest manufacturer manual.

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the maximum proof pressure and the standard filtration rating of the F3000-10-W-F1 filter?

A: Proof pressure is 1.5 MPa, and the standard filtration rating is 5 micrometers for dust removal.

Wiring & Installation:

Q: What is the minimum operating pressure required for the F1 type automatic drain function to operate?

A: The minimum working pressure required for the automatic drain (F1 type) is 0.15 MPa.

Troubleshooting & Compatibility:

Q: What is the recommended upgrade element for removing tar and carbon particles from the air supply?

A: The submicron 0.3 micrometer element, designated with option "Y," is recommended for tar removal.

Replacement & Upgrades:

Q: Can the F3000 series filter be easily connected with a regulator or lubricator for a full F.R.L. system?

A: Yes, it is designed for modular F.R.L. combination using unified key boundary dimensions and joiner fittings.