OVERVIEW

Official designation: PISCO VHH05-4M5 (VH Series, Vacuum Generator)

Role/Application: A high-vacuum ejector designed for direct mounting on a solenoid valve, providing efficient air-powered vacuum for pneumatic handling systems.

KEY SPECS SUMMARY

Power: Air supplied, consumption 11.5 L/min

Interfaces / Ports: Vacuum port 4 mm, Supply port M5x0.8

Indicators: Refer to the latest manufacturer manual.

Operating Temp: 0 to 60 degrees C (No freezing)

Platform / Compatibility: Valve Direct Mounting Type Elbow

Limit: Final vacuum minus 90 kPa

Lifecycle: Active / Standard Pneumatic Component

FREQUENTLY ASKED QUESTIONS

Technical Specifications:

Q: What is the recommended rated supply pressure for the VHH05-4M5 generator?

A: The rated supply pressure is 0.5 MPa, with an operating range of 0.15 to 0.7 MPa.

Wiring & Installation:

Q: What is the primary function of the direct-mount elbow type design for this unit?

A: This design allows for direct mounting onto a solenoid valve, simplifying installation and piping.

Troubleshooting & Compatibility:

Q: What is the nozzle diameter used in the high-vacuum design of the VHH05-4M5?

A: The unit utilizes a 0.5 millimeter nozzle diameter to achieve its high-vacuum performance.

Replacement & Upgrades:

Q: What is the approximate weight of the VHH05-4M5 unit without the solenoid valve?

A: The typical weight for this model is approximately 13.0 grams, confirming its compact design.