EMERSON
-
ABB -
Allen-Bradley -
Azbil -
BALLUFF -
Baumer -
CATL -
CKD -
COGNEX -
DELTA -
DENSO -
EMERSON -
FANUC -
FESTO -
Fuji -
General Electric -
HITACHI -
HIWIN -
Honeywell -
IFM -
Intel -
KEYENCE -
MITSUBISHI -
MURR ELEKTRONIK -
OMRON -
OPTEX -
Panasonic -
Parker Hannifin -
PEPPERL+FUCHS -
PHOENIX CONTACT -
SAMSON -
SANYO -
SCHMERSAL -
Schneider -
SHARP -
SHIMADZU -
SICK -
SIEMENS -
SMC -
SUNON -
TURCK -
Weidmuller -
WIELAND -
YASKAWA -
YOKOGAWA -
ebm-papst -
CONTRINEX -
EATON -
MOELLER -
Telemecanique -
PILZ
EMERSON IC693MDL230
IC693MDL230 Isolated Input Module provides 8 AC input channels operating at 120 VAC within a 95 to 132 VAC range, ensuring reliable signal monitoring through channel isolation. GE Fanuc (EMERSON) Series 90-30 PLC features an ON/OFF response time of 15 to 30 ms and draws 150 mA from the 5 VDC backplane, locate wiring and installation guides and technical specifications for noise-resistant implementation.
US$ 766.67
EMERSON IC693DSM314
GE Fanuc (EMERSON) IC693DSM314 4-axis motion control module manages servo and stepper systems with less than 5 ms motion block processing. This reliable PLC module stores 10 programs and 40 subroutines in non-volatile memory to review technical specifications and wiring and installation tips.
US$ 3,658.33
EMERSON IC693BEM330
GE Fanuc (EMERSON) IC693BEM330 FIP Bus Interface Module provides 1 MHz data exchange using two 9-pin D-shell connectors for distributed control. The Series 90-30 PAC module has four LED indicators and interfaces with 90-70 controllers to examine technical specifications and troubleshooting and compatibility tips.
US$ 3,108.33
EMERSON IC693BEM340
GE Fanuc (EMERSON) IC693BEM340 FIP Bus Controller Module performs 2.5 Mbit/s data exchange between I/O devices and the central PLC. This Series 90-30 module is rack-mounted and shares the power supply for synchronized operation to find wiring and installation and replacement and upgrades information.
US$ 4,150.00
EMERSON IC693MDL660
GE Fanuc (EMERSON) IC693MDL660 discrete input module offers 32 channels for 24 VDC signal monitoring in positive or negative logic. This Series 90-30 module features four 8-channel groups with 7.5 mA rated input current to check technical specifications and wiring and installation guidelines.
US$ 2,350.00
EMERSON IC693CBL305
GE Fanuc (EMERSON) IC693CBL305 is a 1 foot Wye cable for Series 90-30 axis communications coprocessor modules. It utilizes 25-pin RS-232/RS-485 connectors for reliable short-distance data transmission to examine technical specifications and troubleshooting and compatibility charts.
US$ 716.67
EMERSON IC693MDL730
GE Fanuc (EMERSON) IC693MDL730 positive logic discrete output module offers eight channels with 12–24 VDC and 2 A per point output current. The module provides reliable switching with 2 A at 60 C fuse protection to examine technical specifications and wiring and installation tips.
US$ 1,500.00
EMERSON IC693ALG390
GE Fanuc (EMERSON) IC693ALG390 analog module offers two voltage output channels ranging from –10 to +10 VDC for precise control. This Series 90-30 unit has 2.5 mV resolution and 5 ms update rate to check technical specifications and wiring and installation procedures.
US$ 2,158.33
EMERSON IC693CHS398
GE Fanuc (EMERSON) IC693CHS398 is a 10-slot expansion baseplate providing high-density I/O capacity for Series 90-30 PLC systems. It features one power supply slot and one expansion port, offering robust architecture details on technical specifications and replacement and upgrades planning.
US$ 966.67
EMERSON IC693CBL301
GE Fanuc (EMERSON) IC693CBL301 is a 6 feet I/O bus expansion cable with continuous shielding for signal integrity in industrial settings. The cable uses 25-pin male and female connectors for flexible baseplate connection to find technical specifications and wiring and installation guide.
US$ 600.00
EMERSON IC693APU302
GE Fanuc (EMERSON) IC693APU302 Axis Positioning Module features two independent axes for precise servo motor positioning and synchronized motion. Compatible with CPUs including IC693CPU323, the module has a 9-pin axis port to examine technical specifications and troubleshooting and compatibility guides.
US$ 8,083.33
EMERSON IC693BEM341
GE Fanuc (EMERSON) IC693BEM341 FIP Bus Controller Module supports 2.5 MHz data rates through dual 9-pin D-shell connectors for reliable networking. This PAC module has an RS-485 port, interfaces with Series 90-70 controllers, and offers technical specifications and troubleshooting and compatibility data.
US$ 3,625.00
EMERSON IC693CMM302
GE Fanuc (EMERSON) IC693CMM302 Genius communication module connects up to 31 nodes on the Genius I/O network at 153.6 kbaud. This PAC module ensures synchronized data sharing with 128 bytes TX and RX capacity to find technical specifications and wiring and installation guides.
US$ 2,450.00
EMERSON IC693MDL742
GE Fanuc (EMERSON) IC693MDL742 discrete output module features 16 channels for 12–24 VDC positive logic and embedded ESCP for protection. The module supports 1.0 A per channel and 4 A at 50 C group capacity to find technical specifications and wiring and installation tips.
US$ 2,250.00
EMERSON IC693CPU360
GE Fanuc (EMERSON) IC693CPU360 processor module provides 25 MHz speed and a 0.22 ms/1K scan rate for fast logic execution. The single-slot CPU uses the power supply's RS-485 port, has 240 KB user memory, and offers technical specifications and replacement and upgrades planning.
US$ 6,400.00
EMERSON IC693MDL646
GE Fanuc (EMERSON) IC693MDL646 is a discrete input module with 16 channels supporting 24 VDC in both positive and negative logic. The module operates within a 0–30 VDC range at 7 mA input current to review technical specifications and wiring and installation guidelines.
US$ 1,183.33
EMERSON IC693CPU341
GE Fanuc (EMERSON) IC693CPU341 CPU module operates at 20 MHz with a 0.3 ms/1K Boolean logic scan rate for mid-range control. The unit supports 80 Kbytes memory, up to 512 discrete I/O, and uses an SNP/SNP-X port to check technical specifications and replacement and upgrades planning.
US$ 3,108.33
EMERSON IC693ACC336
GE Fanuc (EMERSON) IC693ACC336 auxiliary terminal board is a 36-pin interface for DSM302 and DSM314 motion control modules for precise servo interfacing. It features screw terminals for 14–18 AWG wire and 30 VDC/5 VDC rated inputs to find technical specifications and wiring and installation information.
US$ 1,533.33
EMERSON IC693CPU313
GE Fanuc (EMERSON) IC693CPU313 5-slot embedded CPU baseplate uses a 10 MHz 80188 processor with a 0.6 ms/1K Boolean logic scan rate. This unit supports 12 Kbytes memory and includes an SNP/SNP-X serial port to check technical specifications and replacement and upgrades options.
US$ 2,141.67
EMERSON IC693PBM200
GE Fanuc (EMERSON) IC693PBM200 Profibus DP Master module coordinates data exchange for up to 125 slave units with 244 bytes I/O per slave. The module features RS-232 and RS-485 ports for diagnostics and network interfacing to review technical specifications and troubleshooting and compatibility guides.
US$ 4,616.67
EMERSON IC693CPU352
GE Fanuc (EMERSON) IC693CPU352 is a modular CPU with a 25 MHz 80386EX processor and 0.3 ms/1K Boolean scan rate. It features 240 Kbytes memory, three serial ports, supports 32,640 analog I/O, and offers technical specifications and replacement and upgrades planning details.
US$ 6,425.00
EMERSON IC693CBL316
GE Fanuc (EMERSON) IC693CBL316 is a 3-foot serial cable for secure data transmission between Series 90-30 CPUs and digital servo modules. The cable includes a 9-pin D-shell connector and a 6-pin RJ-11 connector to find technical specifications and wiring and installation data.
US$ 458.33
EMERSON IC693ALG442
GE Fanuc (EMERSON) IC693ALG442 analog combination module has four inputs and two outputs compatible with voltage and current signals. The versatile unit supports 0-20 mA, 4-20 mA, and +/-10 V bipolar/unipolar ranges to review technical specifications and wiring and installation data.
US$ 3,466.67
EMERSON IC693CHS392
GE Fanuc (EMERSON) IC693CHS392 is a 10-slot expansion baseplate with one power supply slot and an expansion port for scalable systems. It supports 50-foot interconnecting cables and DIP switch configuration to review technical specifications and wiring and installation details.
US$ 1,441.67
EMERSON IC693APU301
GE Fanuc (EMERSON) IC693APU301 Axis Positioning Module uses a single motion axis for precise servo motor control and position management. Compatible with IC693CPU323, the module supports follower mode and uses a 9-pin axis port to review technical specifications and troubleshooting and compatibility data.
US$ 4,683.33
EMERSON IC693MDL241
GE Fanuc (EMERSON) IC693MDL241 is a discrete input module with 16 channels supporting both 24 VAC and 24 VDC signals in positive and negative logic. The module operates within a 0–30 V range with 7 mA input current to review technical specifications and wiring and installation guidelines.
US$ 1,183.33
EMERSON IC693ACC307
GE Fanuc (EMERSON) IC693ACC307 is a 25-pin I/O bus terminator plug that ensures signal integrity and stable operation across the expansion network. It is compatible with IC693CBL302 and IC693CBL314 expansion cables to review technical specifications and troubleshooting and compatibility data.
US$ 383.33
EMERSON IC693CHS397
GE Fanuc (EMERSON) IC693CHS397 5-slot baseplate provides dedicated slots for one CPU, one power supply, and four I/O modules for scalable systems. The baseplate includes an expansion port supporting standard modules to access technical specifications and wiring and installation guides.
US$ 858.33
EMERSON IC693CBL328
GE Fanuc (EMERSON) IC693CBL328 I/O cable is 10 feet (3m) long, replacing the IC693CBL315 for Series 90-30 components. It features a 24-pin right-angle connector and flying leads for flexible wiring to find technical specifications and wiring and installation details.
US$ 425.00
EMERSON IC693ALG220
GE Fanuc (EMERSON) IC693ALG220 analog input module delivers precise voltage measurement across 4 channels for reliable automation systems and monitoring and control applications with a 5 mV resolution and 4 milliseconds update rate. This high-performing Series 90-30 component accepts plus/minus 10 VDC signals, consuming 135 mA from the backplane, for full technical specifications and replacement and upgrades guidance download the product reference manual.
US$ 1,533.33
EMERSON IC693MDL340
GE Fanuc (EMERSON) IC693MDL340 discrete output module provides 16 channels for dependable AC load control with 120 VAC nominal output and 0.5 amperes per point current delivery. This Series 90-30 module features 1500 VAC isolation and 315 mA backplane draw for guidance on wiring and installation and replacement and upgrades view the comprehensive technical bulletin.
US$ 2,858.33
EMERSON IC693ACC300
GE Fanuc (EMERSON) IC693ACC300 half-slot input simulator module enables manual input signal simulation for system testing, training, and diagnostics using 16 two-position front switches. The unit operates within an 18 VDC–30 VDC range, drawing 15 mA from the backplane, obtain detailed guidance on troubleshooting and compatibility and comprehensive technical specifications from the official manual.
US$ 575.00